[Free] 2017(Oct) EnsurePass Passguide Microsoft 77-888 Dumps with VCE and PDF 31-40

EnsurePass
2017 Oct Microsoft Official New Released 77-888
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/77-888.html

Microsoft Excel 2010 Expert

Question No: 31

You work as an Office Assistant for Tech Perfect Inc. You are working in a spreadsheet.

You are

facing a problem that when you type in a function and press Enter, the cell shows the function as

you typed it, instead of returning the function#39;s value as shown below:

Which of the following is the reason that is causing the above problem?

  1. You are inserting a new column, next to a column that is already formatted as text.

  2. Excel is trying to reference an invalid cell.

  3. You are inserting a new column, next to a column containing Dates or Times.

  4. The lookup_value or the array you are searching resides in a cell containing unseen spaces at

the start or end of that cell.

Answer: A Explanation:

The Excel Won#39;t Calculate My Function error occurs when a user types in a function and presses

Enter, the cell shows the function as the user typed it, instead of returning the function#39;s value.

The reason that causes this problem is that the cells containing the formula are formatted as

#39;text#39; instead of the #39;General#39; type. This happens when the user inserts a new column, next to a

column that isalreadyformattedastext due to which the newcolumn inheritstheformatting of the adjacent column. Answer option D is incorrect. The Failure to Look Up Values in

Excel erroroccurs when a user gets an unexpected error while trying to look up or match a lookup_value withinan array and Excel is not able to recognize the matching value. If the lookup_value or the arraythe user is searching resides in a cell, the user can have unseen spaces at the start or end ofthat cell. This will create the situation where the contents of the two cells that the user is comparing look the same but extra spaces in one of thecells cause the cells to have slightly different content. The other reason is that the contents ofthe cells that are being compared may have different data types.

Answer option B is incorrect. The Lookup Function Won#39;t Copy Down to Other Rows error occurs when auser uses a function in one cell and it works perfectly but when he attempts to copy the functiondown to other rows, he gets the #REF error. The #REF! error arises when Excel tries to reference aninvalid cell. This error occurs if the user has referenced an entire worksheet by clicking on thegrey square at the top left of the worksheet. For Excel, this reference range is 1 to 1048576.Since the references are Relative References, Excel automatically increases the row references whenthis cell is copied down to other rows in the spreadsheet. Answer option C is incorrect. The Cell Shows a Date or Time Instead of a Number error occursbecause the cell that contains the formula is formatted as a #39;date#39; or #39;time#39; instead of a#39;General#39; type or a number. This situation arises because a user has inserted a new column, next toa column containing Dates or Times, the new column has

#39;inherited#39; the formatting of the adjacentcolumn.

Question No: 32

You work as an Office Assistant for Blue well Inc. The company has a Windows-based network. You are creating a hot spot on a graphic that other users can click to run a macro. Which of the following steps will you take to accomplish the task?

Each correct answer represents a part of the solution. Choose all that apply.

  1. To assign an existing macro to the graphic object, double-click the macro or enter its name in

    TheMacro name box.

  2. Click the arrow next to Shape Outline, and then click No Outline. C. Right-click the created hot spot, and then click Assign Macro.

  3. To create a hot spot on the existing object, on the Insert tab, in the Illustrations group, ClickShapes, select the shape that you want to use, and then draw that shape on the existing object.

  4. Click the name of the macro in the Macro name box, click Edit, and then click OK to edit an

    existing macro.

  5. Click the arrow next to Shape Fill, and then click No Fill on the Format tab.

  6. Click Record, type a name for the macro in the Record Macro dialog box, and then click OK to start the recording of the macro.

  7. Select the hot spot in the worksheet to display Drawing Tools for adding the Format tab.

  8. Click Slicer, type a name for the macro in the Slicer Macro dialog box, and then click OK to

start the recording of the macro.

Answer: A,B,C,D,E,F,G,H

Question No: 33

You work as an Office Assistant for Blue Well Inc. The company has a Windows-based network. You want to quickly filter data in a PivotTable report without opening drop-down lists to find the items that you want to filter. For this purpose, you are required to use a slicer. Which of the following are the ways that you can use to accomplish the task? Each correct answer represents a complete solution. Choose all that apply.

  1. Create a copy of a slicer connected with the PivotTable.

  2. Create a slicer connected with the PivotTable.

  3. Create a slicer by disabling Macros associated with the PivotTable.

  4. Use an existing slicer connected with another PivotTable.

Answer: A,B,D Explanation:

The various ways to use or create slicers to filter PivotTable data in an existing PivotTable are

as follows:

1.Createa slicer connected with the PivotTable. 2.Createa copy of a slicer connected with the PivotTable.

3.Usean existing slicer connected with another PivotTable. Answer option C is incorrect. This is an invalid answer option.

Question No: 34

You work as an Office Assistant for Media Perfect Inc. You have created a report in Excel. You have inserted the following formula in a cell:

VLOOKUP(12, A2:C10, 3, FALSE )

Which of the following actions will be performed by the formula?

  1. Search for the value 12 in the first column of the range, and then returns the value that is

    contained in the third column of the range and on the same row as the lookup value.

  2. Wrong syntax used.

  3. Search the value 3 in the last column of the range, and then returns the value that is in the

    column of the range and on the same row as the lookup value.

  4. Search the value 12 in the third column of the range and then returns the value that is contained in the 12th column of the range and on the same column as the lookup value.

Answer: A Explanation:

The formula will search for the value 12 in the first column of the range, and then returns the

value that is contained in the third column of the range and on the same row as the lookup value.

Question No: 35

You work as an Office Assistant for Blue Well Inc. The company has a Windows-based network. You want to get the trend of the Business data range. For this purpose, you want to use trendlines in the chart. Which of the following steps will you take to apply the trendlines in the chart?

Each correct answer represents a part of the solution. Choose all that apply.

  1. Clear the check box of any Trendline fields to disconnect a slicer.

  2. Select the type that you want from Trendline options.

  3. Click the Insert Trendline arrow, and then click Trendline Connections on the Options tab in theSort amp; Filter group.

  4. Select a chart and then navigate to the Chart Tools Layout tab.

Answer: B,D

Question No: 36

You work as an Office Assistant for Blue Well Inc. The company has a Windows-based network. You have changed some data in the worksheet of the company. You are submitting the sell workbook of the company to the Administrator of the company for comments. Now, you want to merge input that you receive into a copy of that workbook, including the changes and comments that you want to keep. For this purpose, it is required to access and use the stored change history. Which of the following will you use to accomplish the task?

  1. Slicer-enabled highlighting

  2. Onscreen highlighting

  3. Reviewing of changes

  4. History tracking

Answer: C

Explanation:

The following ways are provided by Excel to access and use the stored change history: 1.Onscreen highlighting: It is used when a workbook does not contain many changes and a user

wants to see all changes at a glance.

  1. History tracking: It is used when a workbook has many changes and a user wants to investigate what occurred in a series of changes.

  2. Reviewing of changes: It is used when a user is evaluating comments from other users. Answer option A is incorrect. This is an invalid answer option.

Question No: 37

You work as an Office Assistant for Tech Tree Inc. You have created a report in a workbook in

Microsoft Excel 2010. You want to export XMLdata to your Excel 2010 worksheet. On exporting the XML data, the following error message appears:

quot;XML MAPS IN MY WORKBOOK ARE NOT EXPORTABLEquot;

Which of the following are the reasons that are causing the above error? Each correct answer

represents a complete solution. Choose all that apply.

  1. The maxoccurs attribute is not equal to1.

  2. The relationship of the mapped element with other elements is not preserved.

  3. The element is a recursive structure.

  4. The XML map associated with this XML table contains one or more required elements that are not mapped to the XML table.

Answer: A,B Explanation:

The various issues with exporting XML data are as follows:

  1. MAP CAN BE EXPORTED BUT SOME REQUIRED ELEMENTS ARE NOT MAPPED:

    This error occurs under the following situations:

    The XML map associated with this XML table contains one or more required elements that

    are not mapped to the XMLtable. Theelement is a recursive structure. The XML table contains a variety of mixed content.

  2. EXCEL CANNOT SAVE THE WORKBOOK BECAUSE IT DOES NOT CONTAIN ANY

    XML MAPPINGS: Excel cannot save the user#39;s workbook in the XML Data file unless one or more mapped ranges are created.

  3. XML MAPS IN MY WORKBOOK ARE NOT EXPORTABLE: An XML mapping cannot be

exported if the relationship of the mapped element with other elements is not preserved due to the following reasons:

The mapped element#39;s schema definition is contained within a sequence with the following attributes:

The maxoccurs attribute is not equal to1.

The sequence has more than one direct child element defined or has an extra compositor as a direct child.

Nonrepeating sibling elements with the same repeating parent element are mapped to dissimilar

XML tables.

Various repeating elements are mapped to the same XML table and the recurrence is not defined by an ancestor element.

Child elements from various parents are mapped to the same XML table.

XML schema constructs a list of lists, denormalized data, or a choice construct.

Question No: 38

You work as a Sales Manager for Rainbow Inc. Your responsibility includes preparing sales report of the Sales department. You use Microsoft Excel 2010 to prepare sales reports.

You have created a quarterly sales report of the department. After entering required data and inserting charts, you want to give a professional look to the document. You want to produce the document with soothing graphic effects, soft fonts, and light colors. Which of the following steps will you take to accomplish the task with least administrative burden?

  1. Use the SmartArt option.

  2. Create a new workbook through a template.Copy all data and charts of the report to the new workbook.

  3. Choose one of the pre-built themes.

  4. Select all the text of the document.

Change font style to Verdana and font color to light gray. Use vibrant colors for charts.

Answer: C Explanation:

In order to accomplish the task, you will have to choose one of the pre-built themes.

Document

themes work on the overall design of the entire document. It enables users to specify colors,

fonts, and variety of graphic effects in a document. Themes change the look and feel of the document.

Ensurepass 2017 PDF and VCE

C:\Documents and Settings\Administrator\Desktop\1.JPG

Microsoft Excel 2010 comes with a large collection of pre-built themes. Users can create their own themes for a document. Themes can be specified through Page Layout gt; Themes.

Answer option A is incorrect. The SmartArt option does not produce soothing graphic effects, soft fonts, and light colors.

Answer options B and D are incorrect. These options involve manual processing.

Therefore, any

formatting done manually will increase the administrative burden.

Question No: 39

You work as an Office Assistant for Tech Perfect Inc. You are working in the spreadsheet of the

company#39;s high selling products. You are trying to intersect two ranges that do not intersect each

other. Which of the following errors will be occurred in this situation?

  1. #VALUE!

  2. #NAME?

  3. #NULL!

  4. #DIV/0!

Answer: C Explanation:

The #NULL! error is produced by Excel when a user attempts to intersect two ranges that do not

intersecteachother.Thiserrorcanberesolved byreviewingtheformulaandthen

eitherby changing the variables to ensure that the user is getting a valid intersection or by using the Excel Iferror function to identify a null range and take the required action.

Answer option D is incorrect. Excel #DIV/0! is produced when a formula attempts to divide by zero and a division by zero produces infinity that cannot be represented by a spreadsheet value. This error can be corrected or overcome by using the Excel IF function to identify a possible division by zero and produce an alternative result.

Answer option A is incorrect. The #VALUE! Excel formula error occurs when any of the variables in a formula is of the wrong type. To correct this error, it is required to check each individual part of the formula to make sure that the correct argument types are used. If the function contains nested functions, the best way is to copy each of the arguments into a separate cell to check what they evaluate to. If the formula contains a number of terms, break down each term further to find out its components, until the source of the error is found.

Answer option B is incorrect. The #NAME? error occurs when Excel encounters text in a formula and tries to interpret that text as a reference, a named range, or a function name but is not able to recognize the text as any of these. The best way to approach the

#NAME?

Excel function error is to check the correct spelling of the function names, references, and named

ranges and to check that the variables used as text values are entered in double quotes. If the

formula contains nested functions, it is required to check the results of these individually, until

the source of the error is identified.

Question No: 40

You work as an Office Assistant for Blue Well Inc. The company has a Windows-based network. You want to make a slicer available for use in another PivotTable. Which of the following steps will you take to accomplish the task?

Each correct answer represents a part of the solution. Choose all that apply.

  1. Click the Insert Slicer arrow, and then click Slicer Connections on the Options tab in the Sort

    amp; Filter group.

  2. In the Slicer Connections dialog box, clear the check box of any PivotTable fields for which you want to disconnect a slicer.

  3. In the PivotTable Connections dialog box, select the check box of the PivotTables in which you want the slicer to be available.

  4. Click the slicer that you want to share in another PivotTable.

Answer: C,D

100% Free Download!
Download Free Demo:77-888 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 77-888 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

[Free] 2017(Oct) EnsurePass Passguide Microsoft 77-888 Dumps with VCE and PDF 21-30

EnsurePass
2017 Oct Microsoft Official New Released 77-888
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/77-888.html

Microsoft Excel 2010 Expert

Question No: 21

You work as an Office Assistant for Tech Perfect Inc. You are working in the spreadsheet of the

company#39;s high selling products. You want to find out the matching values. You get an unexpected error that when you attempt to look up or match a lookup_value within an array, Excel is not able to recognize the matching value. Which of the following steps will you take to resolve the problem? Each correct answer represents a part of the solution. Choose all that apply.

  1. Remove the unseen spaces at the start or end of the first Macro cell.

  2. Delete the column having the TRIM function.

  3. Copy the contents of the new column and paste them on the top of the original column by using paste gt; special gt; values sequence.

  4. Create a new column subsequent to the one with the additional spaces in it.

  5. Use the TRIM function in the new column.

Answer: B,C,D,E Explanation:

In this situation, you will take the following steps:

1.Create a new column subsequent to the one with the additional spaces in it. 2.Use the TRIM function in the new column to get rid of extra spaces.

  1. Copy the contents of the new column and paste them on the top of the original column by usingpaste gt; special gt; values sequence.

  2. Delete the column having the TRIM function.

Answer option A is incorrect. This is an invalid answer option.

Question No: 22

Rick works as an Office Assistant for Tech Perfect Inc. He is creating a report through Microsoft

Excel

2010. Rick wants to trace the project with the actual requirements. For this purpose, he is

required to compare month to month, actual v budget, quarter to quarter, year to year variances.

Which of the following will Rick use to accomplish the task?

  1. Evaluate Formula

  2. Accounting template

  3. Form control

  4. Trust Center

Answer: B Explanation:

The accounting template is used for numbering months of a financial year to period numbering. It is used to compare month to month, actual v budget, quarter to quarter, year to year variances. It is the initial point for other reports that need the use of months.

Answer option C is incorrect. A form control is an original control that is compatible with old versions of Excel, beginning with Excel version5.0. It is designed for use on XLM macro sheets. It can be used when a user wants to simply interact with cell data without using VBA code and when he wants to add controls to chart sheets. By using form controls, the user can run macros. He can attach anexisting macro to a control, or write or record a new macro. These controls cannot be addedtoUserForms, used to control events, or modified to run Web scripts on Web pages.

AnsweroptionAisincorrect.EvaluateFormulaistheformulaexaminationtoolprovided

by Microsoft Excel. This tool is useful for examining formulas that do not produce any error but

are not generating the expected result.

Answer option D is incorrect. Trust Center is where a user can find security and privacy settings

ForMicrosoft Office 2010 programs.

Question No: 23

Rick works as an Office Assistant for Tech Perfect Inc. He is creating a report through Microsoft

Excel 2010. Rick wants to interact with cell data but his computer does not contain VBA code and few features of his computer are still Excel 5. 0 features. Which of the following will

Rick use to accomplish the task?

  1. Accounting template

  2. Trust Center

  3. Form control

  4. Evaluate Formula

Answer: C Explanation:

A form control is an original control that is compatible with old versions of Excel, beginning with Excel version5.0. It is designed for use on XLM macro sheets. It can be used when a user wants to simply interact with cell data without using VBA code and when he wants to add controls to chart sheets. By using form controls, the user can run macros. He can attach an existing macro to a control, or write or record a new macro. These controls cannot be added to UserForms, used to control events, or modified to run Web scripts on Web pages.Answer option A is incorrect. The accounting template is used for numbering months of a financial year to period numbering. It is used to compare month to month, actual v budget, quarter to quarter, year to year variances. It is the initial point for other reports that need the use of months.

AnsweroptionDisincorrect.EvaluateFormulaistheformulaexaminationtoolprovided

by Microsoft Excel. This tool is useful for examining formulas that do not produce any error but

are not generating the expected result.Answer option B is incorrect. Trust Center is where a user

can find security and privacy settings for Microsoft Office 2010 programs.

Question No: 24

You work as an Office Assistant for Media Perfect Inc. You are creating a report in Microsoft Excel 2010. The report worksheet will include the sales made by all the sales managers in the month of January.

In the worksheet, you are required to place a pictorial representation displaying the percentage of

total sales made by each sales manager in January. Which of the following charts will you use to

accomplish the task?

  1. Bar

  2. Line

  3. Column

  4. Pie

Answer: D Explanation:

In order to accomplish the task, you will have to insert a pie chart in the worksheet. Excel provides a pie chart facility to display data that is arranged in one column or row on a worksheet.

Pie charts display the size of items in one data series, proportional to the sum of the items.

Question No: 25

You work as an Office Assistant for Tech Perfect Inc. You are working in a spreadsheet. You use a function in one cell and it works perfectly but when you attempt to copy the function down to other rows, you get the #REF error. Which of the following are the reasons that are causing the above problem?

Each correct answer represents a complete solution. Choose all that apply.

  1. You are inserting a new column, next to a column that is already formatted as text.

  2. Excel is trying to reference an invalid cell.

  3. The lookup_value or the array you are searching resides in a cell containing unseen spaces at the start or end of that cell.

  4. You are referencing an entire worksheet by clicking on the grey square at the top left of the

worksheet.

Answer: B,D Explanation:

The Lookup Function Won#39;t Copy Down to Other Rows error occurs when a user uses a function in one cell and it works perfectly but when he attempts to copy the function down to other rows, he gets the #REF error. The #REF!Errorarises when Excel tries to reference an invalid cell. This error occurs if the user has referenced an entire worksheet by clicking on the grey square at the top left of the worksheet. For Excel, this reference range is 1 to

1048576. Since the references are Relative References, Excel automatically increases the row references when this cell is copied down to other rows in the spreadsheet.

Answer option C is incorrect. The Failure to Look Up Values in Excel error occurs when a user gets an unexpected error while trying to look up or match a lookup_value within an array and Excel is not able to recognize the matching value. If the lookup_value or the array the user issearching resides in a cell, the user can have unseen spaces at the start or end of that cell. This will create the situation where the contents of the two cells that the user is comparing look the same but extra spaces in one of the cells cause the cells to have slightly different content. The other reason is that the contents of the cells that are being compared may have different data types.

Answer option A is incorrect. The Excel Won#39;t Calculate My Function error occurs when a user types in a function and pressesEnter;the cell shows the function as the user typed it, instead of

returning the function#39;s value. The reason that causes this problem is that the cells containing

the formula are formatted as #39;text#39; instead of the #39;General#39; type. This happens when the user

inserts a new column, next to a column that is already formatted as text due to which the new

column inherits the formatting of the adjacent column.

Question No: 26

You work as an Office Assistant for Blue well Inc. You want to record a macro and save it with the name quot;Auto_Openquot; so that the macro will run whenever you open the workbook containing the macro.

While doing so, you observe that the Auto_Open macro fails every time. Which of the following are the causes of this?

Each correct answer represents a complete solution. Choose all that apply.

  1. The default workbook or a workbook loaded from the XLStart folder is opened before running the macro.

  2. The workbook is opened programmatically using the Open method.

  3. TheworkbookwhereauserwantstosavetheAuto_Openmacroalreadycontainsa VBAprocedure in its Open event.

  4. The workbook is based on the record button that is disabled by default before running

the

Auto_Open macro.

Answer: A,B,C Explanation:

The various limitations of recording an Auto_Open macro are as follows:

  1. If the workbook where a user wants to save the Auto_Open macro already contains a VBA procedure in its Open event, then all actions in the Auto_Open macro are overridden by the VBA procedure used for the Open event.

  2. The Auto_Open macro will be ignored when a workbook is opened programmatically using theOpen method.

  3. The Auto_Open macro runs before any other workbooks are opened. Therefore, if the user records actions he wants Excel to perform on the default workbook or a workbook loaded from the XLStart folder, the Auto_Open macro will fail when the user restarts Excel because it runs before the default and start-up workbooks are opened.

Answer option D is incorrect. This is an invalid answer option.

Question No: 27

Rick works as an Office Assistant for Tech Perfect Inc. He is creating a user form through

Microsoft Excel 2010. While creating forms for a number of users, he is required to repeat some of the actions multiple times. It is a very time consuming process. To resolve this issue, he wants to record the sequence of actions to perform a certain task and to play them back in the same order.

Which of the following actions will Rick take to accomplish the task?

  1. He will use the Trust Center bar.

  2. He will use the Evaluate Formula tool.

  3. He will put the workbook in a trusted location.

  4. He will create and run a macro.

Answer: D Explanation:

A macro is defined as a tool that permits a user to automate tasks and add several functionalities

to forms, reports, and controls. For example, if a user adds a command button to a form, he associates the button#39;s OnClick event to a macro, and the macro consists of the commands that are to be performed by the button each time it is clicked.

The macro records the user#39;s mouse clicks and keystrokes while he works and lets him play them back later. The macro can be used to record the sequence of commands that the user uses to perform a certain task. When the user runs the macro, it plays those exact commands back in the same order.

Answer option B is incorrect. Evaluate Formula is a formula examination tool provided by Microsoft Excel. This tool is useful for examining formulas that do not produce any error but are not generating the expected result.

Answer options A and C are incorrect. The benefit of connecting to external data from Microsoft

Excel is that a user can automatically update Excel workbooks from the real data source wheneverthe data source is updated with new information. It is possible that the external data connection might be disabled on the computer. For connecting to the data source whenever a workbook is opened, it is required to enable data connections by using the Trust Center bar or by putting the workbook in a trusted location.

Question No: 28 HOTSPOT

Rick works as an Office Assistant for Tech Perfect Inc. He is creating a report through Microsoft

Excel 2010. He wants to fill the active cell with the content of the adjacent cell. Mark the option that he will choose to accomplish the task.

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Explanation:

Ensurepass 2017 PDF and VCE

C:\Documents and Settings\Administrator\Desktop\1.JPG

Ensurepass 2017 PDF and VCE

C:\Documents and Settings\Administrator\Desktop\1.JPG

Question No: 29

Which of the following steps will you take to merge copies of a shared workbook? Each correct

answer represents a part of the solution. Choose all that apply.

  1. In the Select Files to Merge into Current Workbook dialog box, click a copy of the workbook

    containing changes to be merged, and then click OK.

  2. Click Compare and Merge Workbooks on Quick Access Toolbar.

  3. Open the copy of the shared workbook to merge the changes.

  4. Save the workbook if prompted.

  5. Add Compare and Merge Workbooks.

  6. Click Compare and Merge Workbooks on Macro Enabled Access Toolbar.

Answer: A,B,C,D,E Explanation:

Take the following steps to merge copies of a shared workbook: 1.Add Compare and Merge Workbooks.

2.Open the copy of the shared workbook to merge the changes. 3.Click Compare and Merge Workbooks on Quick Access Toolbar.

  1. Save the workbook if prompted.

  2. In the Select Files to Merge into Current Workbook dialog box, click a copy of the workbook

containing changes to be merged, and then click OK.

Question No: 30

You work as an Office Assistant for Tech Tree Inc. You have created a report in a workbook in

Microsoft Excel 2010. You want to summarize a large amount of data to analyze numerical data and to answer unexpected questions about your data in the Business Intelligence (BI) report that you are working with. For this purpose, you are required to create a PivotTable. Which of the following steps will you take to accomplish the task?

Each correct answer represents a part of the solution. Choose all that apply.

  1. Click OK.

  2. Choose Select a table or range under Choose the data that you want to analyze.

  3. Select the Macro-enabled checkbox in the Insert Security dialog box, and then click OK.

  4. Click PivotTable or click the arrow below PivotTable, and then click PivotTable in the Tables

    group on the Insert tab.

  5. Click a cell in the cell range that contains data for using worksheet data as the data source.

Answer: A,B,D,E

100% Free Download!
Download Free Demo:77-888 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 77-888 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

[Free] 2017(Oct) EnsurePass Passguide Microsoft 77-888 Dumps with VCE and PDF 11-20

EnsurePass
2017 Oct Microsoft Official New Released 77-888
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/77-888.html

Microsoft Excel 2010 Expert

Question No: 11

You work as a Sales Manager for Maini Industries. Your company manufactures and sells

construction equipment. You have to create a report that will show the highest selling items of

each month. The report will be in the following format:

Ensurepass 2017 PDF and VCE

In a workbook, you create a table named Item_table as shown below:

Ensurepass 2017 PDF and VCE

You fill in the required entries in the workbook.

Ensurepass 2017 PDF and VCE

For the third column of the sheet, you want to use formulas to fill in the values. You want

the

cells in the third column to get automatically filled with the names corresponding to ItemID in the second column. You want the exact values to be filled in the column. You select the C2 cell in the third column.

Which of the following formulas will you enter in order to accomplish the task?

A. =VLOOKUP(B2,Item_table,2,FALSE)

B. =VLOOKUP(B2,Item_table,2,TRUE)

C. =VLOOKUP(2,Item_table,B2,FALSE)

D. =VLOOKUP(2,Item_table,B2,TRUE)

Answer: A Explanation:

In order to accomplish the task, you will use the following formula:

=VLOOKUP(B2,Item_table,2,FALSE)

Answer option B is incorrect. According to the question, you want the exact values in the column.

The TRUE value in the range_lookupargument provides the approximate match.

Answer options C and D are incorrect. The VLOOKUP functions used in the formulas have wrong syntaxes.

Question No: 12

You work as an Office Assistant for Tech Perfect Inc. Your responsibility includes preparing sales reports of the company. You have created a sales report in a workbook of Excel 2010.

Your workbook includes several worksheets as shown in the image given below:

You want the sheet tabs of the sheets containing charts to appear in red color. Which of the following steps will you take to accomplish the task?

  1. Select the sheets containing charts.

    Select the Colors option in the Themes group on the Page Layout page.

  2. Select the sheets containing charts. Right-click on the sheet tabs.

    Choose the Tab Color option from the shortcut menu.

  3. Select the sheets containing charts. Right-click on the sheet tabs.

    Choose the Sheet Color option from the shortcut menu.

  4. Select the sheets containing charts.

    Select the Effects option in the Themes group on the Page Layout page.

  5. \Documents and Settings\Administrator\Desktop\1.JPG

Answer: B Explanation:

According to the question, you want the sheet tabs of the sheets containing chart to appear in red

color. In order to accomplish the task, you will have to take the following steps:

Question No: 13

Rick works as an Office Assistant for Tech Perfect Inc. He is creating a user form through Microsoft Excel 2010. While creating forms for a number of users, he is required to repeat some of the actions multiple times. It is a very time consuming process. To resolve the issue, he has created a macro to record the sequence of actions to perform a certain task. Now, he wants to run the macro to play those exact actions back in the same order. Which of the following steps will Rick take to accomplish the task?

Each correct answer represents a part of the solution. Choose all that apply.

  1. Click on the #39;Macros#39; icon in the #39;Developer#39; tab under the #39;Code#39; category to run a Macro.

  2. The Macro will be run in any worksheet of the Workbook.

  3. Put the workbook in a trusted location.

  4. The Macro dialogue box appears on the screen which contains a list of Macros in it. Select the

    Macro to run and click the Run button.

  5. Run the created Macro by using the shortcut key specified while creating the Macro.

Answer: A,B,D,E Explanation:

Take the following steps to run a Macro:

  1. Click on the #39;Macros#39; icon in the #39;Developer#39; tab under the #39;Code#39; category to run a Macro.

    Ensurepass 2017 PDF and VCE

    C:\Documents and Settings\Administrator\Desktop\1.JPG

  2. The Macro dialogue box appears on the screen which contains a list of Macros in it. Select the

Macro to run and click the Run button.

Ensurepass 2017 PDF and VCE

C:\Documents and Settings\Administrator\Desktop\1.JPG 3.The Macro will be run in any worksheet of the Workbook.

4.A user can run the created Macro by using the shortcut key that he has specified while creatingthe Macro. The macro records the user#39;s mouse clicks and keystrokes while he works and lets himplay them back later. The macro can be used to record the sequence of commands that the user usesto perform a certain task. When the user runs the macro, it plays those exact commands back in thesame order. Answer option C is incorrect. The benefit of connecting to external data from Microsoft Excel isthat a user can automatically update Excel workbooks from the real data source whenever the datasource is updated with new information. It is possible that the external data connection might bedisabled on

the computer. For connecting to the data source whenever a workbook is opened, it isrequired to enable data connections by using the Trust Center bar or by putting the workbook in atrusted location.

Question No: 14

You work as an Office Manager for Blue Well Inc. The company has a Windows-based network. You have two budget situations in which one is the worst case and the other is the best case. You want to create both situations on the same worksheet and then switch between them with the change in requirements. Which of the following will you use to accomplish the task?

  1. Goal Seek

  2. Data table

  3. Scenario

  4. Solver add-in

Answer: C Explanation:

A scenario is defined as a type of what-if analysis tools. It is a set of values saved by Excel and

can be substituted automatically in cells on a worksheet. A user can create and save different

groups of values on a worksheet and then switch to any of these new scenarios to view different

results. Scenario reports are not automatically recalculated. If the user changes the values of a

scenario, those changes will not be displayed in an existing summary report and he must create a

new summary report to show the reflection of the changed report.Answer option A is incorrect.

Goal Seek is defined as a type of what-if analysis tools. It is used if a user knows the result that he wants from a formula, but he is not sure what input value the formula needs to get that

result. It works with only one variable input value.

Answer option D is incorrect. The Solveradd-in is used if a user knows the result that he wants from a formula, but he is not sure whatinput value the formula needs to get that result. It is used for more than one input value. Itworks with a group of cells related to the formula in the objective cell. Answer option B isincorrect. A data table is used to see all the outcomes in one place. It is defined as a type ofwhat-if analysis tools. It is used if a user has a formula that uses one or two variables ormultiple formulas that all use one common variable. It is used to examine a range of possibilitiesat a glance and since the user focuses on only one or two variables, results are easy to read andshare in tabular form. If automatic recalculation is enabled, it is possible to recalculate thedata in data tables immediately and as a result, the user always gets fresh data.

Question No: 15 HOTSPOT

You work as an Office Assistant for Blue Well Inc. The company has a Windows-based network. You want to insert a signature line that specifies the individual who must sign. Mark the option that you will choose to accomplish the task.

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Explanation:

The following figure shows the option used to insert a signature line that specifies the individual

who must sign.

Ensurepass 2017 PDF and VCE

C:\Documents and Settings\Administrator\Desktop\1.JPG

Question No: 16

You work as an Office Assistant for Tech Tree Inc. You have created a report in a workbook in Microsoft Excel 2010. You have included various subtotals in a worksheet in the report to verify data accuracy. You want to remove all subtotals from the sheet before you send it to your manager.

Which of the following steps will you take to accomplish the task with the least administrative effort?

  1. Select all the subtotals.From the shortcut menu, click the Remove All Subtotals option.

  2. Hide the rows containing subtotals.

  3. Open the Subtotal dialog box by clicking the Subtotal option in the Outline group on the Data

    tab. Click the Remove All button.

  4. Delete all the rows containing subtotals.

Answer: C Explanation:

According to the question, you have to remove all subtotals from the worksheet with the least administrative effort. You can remove all subtotals from a worksheet at a time. For this, take the following steps: Open the Subtotal dialog box by clicking the Subtotal option in the Outline group on the Data tab.

Click the Remove All option.

Ensurepass 2017 PDF and VCE

C:\Documents and Settings\Administrator\Desktop\1.JPG

Answer option A is incorrect. No such option is provided in Excel 2010.

Ensurepass 2017 PDF and VCE

C:\Documents and Settings\Administrator\Desktop\1.JPG

Answer option B is incorrect. Although this will hide the rows containing the subtotals, thecontents will remain there and can be made visible by using the Unhide row option. Moreover, thequestion specifically specifies to remove all subtotals from the sheet.

Answer option D isincorrect. Although this step will accomplish the task, it will involve a lot of administrativeburden of selecting each row and deleting it manually.

Question No: 17

Ensurepass 2017 PDF and VCE

You work as an Office Assistant for Tech Perfect Inc. You are working in a spreadsheet as shown below:

You want to use Excel Transpose Function for copying the contents of cells B1:B3 into cells A5:C5.

You simply type #39;=TRANSPOSE( B1:B3 )#39; into the cells A5:C5. It displays the Excel

#VALUE! error message because the cells are working independently and the function will not work for each individual cell. Therefore, it is required to make the cells A5:C5 work together as an ARRAY. For this purpose, you are required to use an array formula. Which of the following steps will you take to input Excel array formulas in the spreadsheet?

Each correct answer represents a part of the solution. Choose all that apply.

  1. Type the array formula into the first cell.

  2. Highlight the range of cells that you want to use as an input in his array formula.

  3. Press CTRL-SHIFT-Tab to remove the error message.

  4. Press CTRL-SHIFT-Enter.

Answer: A,B,D Explanation:

The following steps are taken to input Excel array formulas:

  1. Highlight the range of cells that a user wants to use as an input in his array formula. 2.Type the array formula into the first cell or make this cell editable by pressing F2 or clicking

    in theformula bar if a user has already specified a value into the first cell. 3.Press CTRL-SHIFT-Enter.

    Answer option C is incorrect. This is an invalid answer option.

    Question No: 18

    You work as an Office Assistant for Tech Perfect Inc. You are working in the spreadsheet of the company#39;s high selling products. You want to find out the matching values in the columns. While doing so, you get an unexpected error that when you attempt to look up or match a lookup_value within an array; Excel is not able to recognize the matching value. You want to store sets of values as text and convert sets of data to text by using Excel#39;s Text To Columns tool. Which of the following steps will you take to accomplish the task?

    Each correct answer represents a part of the solution. Choose all that apply.

    1. Select the Text to Columns option from the Data tab at the top of the Excel workbook.

    2. SelectText and click the Finish button in Column Data Formats.

    3. Select theDelimited option and click Next

    4. Make sure that all delimiter options are unselected, and then again click Next.

    5. Remove the unseen spaces at the start or end of the first Macro cell.

    6. Select the cells to convert their data to text.

    Answer: A,B,C,D,F Explanation:

    In this situation, you will take the following steps: 1.Select the cells to convert their data to text.

  2. Select the Text to Columns option from the Data tab at the top of your Excel workbook. 3.Select the Delimited option and click Next.

4.Make sure that all delimiter options are unselected, and then again click Next. 5.Select Text and click the Finish button in Column Data Formats.

Question No: 19 HOTSPOT

You work as a Sales Manager for Rainbow Inc. You are working on a report in a worksheet in Excel 2010. You want to insert flow-chart in the sheet. Mark the option that you will

choose to insert flow- chart symbols in the report. Explanation: In order to accomplish the task, you will have to choose the Shapes option. Shapes are simple objects provided by Microsoft Office to add them to a document. A single shape or combined multiple shapes can be inserted in the document. The Office includes simple shapes, such as lines, basic geometric shapes, arrows, equation shapes, flowchart

shapes, stars, banners, and callouts. Users can add text, bullets, numbering, and Quick Styles to

these shapes after inserting them in the document. Take the following steps to add a shape in a

document:

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Ensurepass 2017 PDF and VCE

Explanation:

C:\Documents and Settings\Administrator\Desktop\1.JPG

Ensurepass 2017 PDF and VCE

C:\Documents and Settings\Administrator\Desktop\1.JPG

Question No: 20

You work as an Office Assistant for Tech Tree Inc. You have created a report in a workbook in Microsoft Excel 2010. You have a number of PivotTables in a single report. You want to apply the same filter to all of those PivotTables. For this purpose, you are required to create a slicer in one PivotTable and share it with other PivotTables. Which of the following steps will you take to accomplish the task?

Each correct answer represents a part of the solution. Choose all that apply.

  1. In the Insert Slicers dialog box, select the check box of the PivotTable fields for which you

    want to create a slicer.

  2. Click Insert Slicer in the Sort amp; Filter group on the Options tab.

  3. Hold down CTRL, and then click the items on which you want to filter.

  4. Select the Macro enabled checkbox of the PivotTable fields for which you want to create a slicer in the Insert Security dialog box and then click OK.

  5. Click anywhere in the PivotTable report for which you want to create a slicer.

Answer: A,B,C,E

100% Free Download!
Download Free Demo:77-888 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 77-888 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

[Free] 2017(Oct) EnsurePass Passguide Microsoft 77-888 Dumps with VCE and PDF 1-10

EnsurePass
2017 Oct Microsoft Official New Released 77-888
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/77-888.html

Microsoft Excel 2010 Expert

Question No: 1

Rick works as an Office Assistant for Tech Perfect Inc. He is responsible for preparing sales

reports of the company. He has created a sales report in a workbook of Excel 2010 and this workbook contains various worksheets as shown in the image given below:

Ensurepass 2017 PDF and VCE

Rick wants the sheet tabs of the sheets containing charts to appear in red color. Which of the

following steps will Rick take to accomplish the task?

  1. Select the sheets containing charts. Select the Colors option in the Themes group on the

    Page Layout page.

  2. Select the sheets containing charts. Right-click on the sheet tabs.

  3. Select the sheets containing charts. Right-click on the sheet tabs. Choose the Sheet Color

    Optionfrom the shortcut menu.

  4. Select the sheets containing charts. Select the Effects option in the Themes group on the

Page Layout page.

Answer: B Explanation:

According to the question, Rick wants the sheet tabs of the sheets containing charts to appear in

red color. In order to accomplish the task,he will take the following steps: 1.Select the sheets containing charts.

Ensurepass 2017 PDF and VCE

C:\Documents and Settings\Administrator\Desktop\1.JPG

2.Right-click on the sheet tabs. Choose the Tab Color option from the shortcut menu.

Ensurepass 2017 PDF and VCE

C:\Documents and Settings\Administrator\Desktop\1.JPG

Answer options A and D are incorrect. These steps will not affect the appearance of the sheet tabs.

Answer option C is incorrect. This is an invalid answer option.

Question No: 2

You work as a Sales Manager for Tech Perfect Inc. You are creating a report for your sales team

Using Microsoft Excel. You want the report to appear in the following format:

You want the Remark column to be filled through a conditional formula. The criteria to give the

remark is as follows:

If the sales of the First Quarter are greater than or equal to 1200, display quot;Well Donequot; If the sales of the First Quarter is less than 1200, display quot;Improve in Next Quarterquot;

You have done most of the entries in a workbook. You select the F2 cell as shown in the image given below:

Which of the following conditional formulas will you insert to accomplish the task?

A. =IF(E2gt;=1200,quot;Improve in Next Quarterquot;,quot;Well Donequot;)

B. =IF(E2lt;=1200,quot;Well Donequot;,quot;Improve in Next Quarterquot;)

C. =IF(E2gt;=1200,quot;Well Donequot;,quot;Improve in Next Quarterquot;)

D. =IF(E2gt;1200,quot;Improve in Next Quarterquot;,quot;Well Donequot;)

Answer: C Explanation:

In order to accomplish the task, you will have to insert the following formula in the F2 cell:

=IF(E2gt;=1200,quot;Well Donequot;,quot;Improve in Next Quarterquot;)

Answer option A is incorrect. This will display the wrong messages for the given conditions.

The

first expression after the logical condition is returned by the IF function when the condition is

TRUE.

Answer option B is incorrect. This formula will not accomplish the task as the logical condition is not correct. The specified condition in this formula is testing for values less than or equal to

1200. Whereas, the question#39;s requirement is to evaluate values greater than or equal to 1200.

Answer option D is incorrect. This formula will not accomplish the task because of the two reasons.

First, the equal sign is missing in the condition. Second, the expressions are not in the correct

order.

Question No: 3

Rick works as an Office Assistant for Tech Perfect Inc. The company has a Windows- based network.

Rick wants to display data series, categories, data markers, and axes in the report. Which of the

following actions will Rick take to accomplish the task?

  1. He will use stand-alone slicers.

  2. He will create a PivotTable report.

  3. He will configure form controls.

  4. He will create a PivotChart report.

Answer: D Explanation:

The PivotChart report is used to provide a graphical representation of data in a PivotTable report in an interactive way. Whenever a user creates the PivotChart report, PivotChart report filters are displayed in the chart area. These are used for sorting and filtering the underlying data of the PivotChart report. Changes made to the layout and data in the associated PivotTable report are immediately reflected in the layout and data in the PivotChart report. The PivotChart report shows data series, categories, data markers, and axes in the same way as the standard charts do. It is possible to change the chart type and other options such as titles, legend placement, data labels, and chart location.

Answer option A is incorrect. Stand-alone slicers are referenced from Online Analytical Processing (OLAP) Cube functions. These stand-alone slicers can be connected with any PivotTable in future.

They can be added by using the slicer button on the Ribbon. They need to be manually linked into grids as required.

Answer option C is incorrect. A form control is an original control that is compatible with old versions of Excel, beginning with Excel version5.0. It is designed for use on XLM macro sheets. It can be used when a user wants to simply interact with cell data without using VBA code and when he wants to add controls to chart sheets. By using form controls, the user can run macros. He can attach an existing macro to a control, or write or record a new macro. These controls cannot be added to UserForms, used to control events, or modified to run Web scripts on Web pages.

Answer option B is incorrect. A PivotTable report is used to summarize large amounts of data, to analyze numerical data, and to answer unexpected questions about data.

Question No: 4

You work as a Finance Manager for Blue Well Inc. The company has a Windows-based network. You are using Excel spreadsheet for maintaining the financial budget and other financial calculations. You want to return the price per $100 face value of a security that pays interest at maturity. Which of the following financial functions will you use to accomplish the task?

  1. PRICE function

  2. PPMT function

  3. PRICEMAT function

  4. PRICEDISC function

Answer: C Explanation:

Various financial functions (reference) are as follows:

  1. ACCRINT function:Itisused toreturntheaccruedinterest forasecuritythatpaysperiodic interest.

  2. ACCRINTM function: It is used to return the accrued interest for a security that pays interest at maturity.

  3. AMORDEGRC function: It is used to return the depreciation for each accounting period by using a depreciation coefficient.

  4. COUPDAYBS function: It is used to return the number of days from the beginning of the coupon period to the settlement date.

  5. AMORLINC function: It is used to return the depreciation for each accounting period. 6.COUPDAYS function: It is used to return the number of days in the coupon period containing the settlement date.

  1. COUPDAYSNC function: It is used to return the number of days from the settlement date to the next coupon date.

  2. COUPNCD function: It is used to return the next coupon date after the settlement date. 9.COUPNUM function: It is used to return the number of coupons payable between the settlement date and maturity date.

  1. COUPPCD function: It is used to return the previous coupon date before the settlement date.

  2. CUMIPMT function: It is used to return the cumulative interest paid between two periods.

  3. CUMPRINC function: It is used to return the cumulative principal paid on a loan between two periods.

  4. DB function: It is used to return the depreciation of an asset for a specified period by using

    the fixed-declining balance method.

  5. DDB function: It is used to return the depreciation of an asset for a particular period by

    using

    the double-declining balance method.

  6. DISC function: It is used to return the discount rate for a security.

  7. DOLLARDE function: It is used to convert a dollar price that is expressed as a fraction into a

    dollar price that is expressed as a decimal number.

  8. DOLLARFR function: It is used to convert a dollar price that is expressed as a decimal number intoa dollar price that is expressed as a fraction.

  9. DURATION function: It is used to return the annual duration of a security with periodic interest payments.

  10. EFFECT function: It is used to return the effective annual interest rate. 20.FV function: It is used to return the future value of an investment.

  1. FVSCHEDULE function: It is used to return the future value of a starting principal after applying a series of compound interest rates.

  2. INTRATE function: It is used to return the interest rate for a fully invested security. 23.IPMT function: It is used to return the interest payment for an investment for a specified period.

24.IRR function: It is used to return the internal rate of return for a series of cash flows. 25.ISPMTfunction:Itisusedtocalculatetheinterestpaidduringaparticularperiodofan investment.

  1. MDURATION function: It is used to return the Macauley modified duration for a security with an assumed par value of $100.

  2. MIRR function: It is used to return the internal rate of return in which positive and negative

    cash flows are financed at different rates.

  3. NOMINAL function: It is used to return the annual nominal interest rate. 29.NPER function: It is used to return the number of periods for an investment.

  1. NPV function: It is used to return the net present value of an investment on the basis of a

    series of periodic cash flows and a discount rate.

  2. ODDFPRICE function: It is used to return the price per $100 face value of a security with an odd first period.

  3. ODDFYIELD function: It is used to return the yield of a security with an odd first period. 33.ODDLPRICE function: It is used to return the price per $100 face value of a security with an odd last period.

34.ODDLYIELD function: It is used to return the yield of a security with an odd last period. 35.PMT function: It is used to return the periodic payment for an annuity.

  1. PPMT function: It is used to return the payment on the principal for an investment for a particular defined period.

  2. PRICE function: It is used to return the price per $100 face value of a security that pays

    periodic interest.

  3. PRICEDISC function: It is used to return the price per $100 face value of a discounted security.

  4. PRICEMAT function: It is used to return the price per $100 face value of a security that pays

    interest at maturity.

  5. PV function: It is used to return the current value of an investment. 41.RATE function: It is use d to return the interest rate per period of an annuity.

  1. RECEIVED function: It is used to return the amount received at maturity for a fully invested

    security.

  2. SLN function: It is used to return the straight-line depreciation of an asset for one period. 44.SYD function: It is used to return the sum-of-years#39; digits depreciation of an asset for a particular period.

45.TBILLEQ function: It is used to return the bond-equivalent yield for a Treasury bill. 46.TBILLPRICE function: It is used to return the price per $100 face value for a Treasury bill.

  1. TBILLYIELD function: It is used to return the yield for a Treasury bill.

  2. VDB function: It is used to return the depreciation of an asset for a specified or partial period by using a declining balance method.

  3. IRR function: It is used to return the internal rate of return for a schedule of cash flows that isnot necessarily periodic.

  4. XNPV function: It is used to return the net present value for a schedule of cash flows that is

    not necessarily periodic.

  5. YIELD function: It is used to return the yield on a security that pays periodic interest. 52.YIELDDISC function: It is used to return the annual yield for a discounted security.

  1. YIELDMAT function:It isusedto returntheannualyield ofa securitythat pays interest at maturity.

    Question No: 5

    Rick works as an Office Assistant for Tech Perfect Inc. The company has a Windows- based network.

    Rick has to perform the following tasks:

    Summarize large amounts of data. Analyze numeric data.

    Answer unexpected questions about data.

    Which of the following actions will Rick take to accomplish the task?

    1. He will create the accounting template.

    2. He will use stand-alone slicers.

    3. He will create a PivotTable report.

    4. He will configure form controls.

Answer: C Explanation:

A PivotTable report is used to summarize large amounts of data, to analyze numerical data, and to answer unexpected questions about data.

Answer option B is incorrect. Stand-alone slicers are referenced from Online Analytical Processing (OLAP) Cube functions. These stand-alone slicers can be connected with any PivotTable in future.

They can be added by using the slicer button on the Ribbon. They need to be manually linked into grids as required.

Answer option D is incorrect. A form control is an original control that is compatible with old versions of Excel, beginning with Excel version5.0. It is designed for use on XLM macro sheets. It can be used when a user wants to simply interact with cell data without using VBA code and when he wants to add controls to chart sheets. By using form controls, the user can run macros. He can attach an existing macro to a control, or write or record a new macro. These controls cannot be added to UserForms, used to control events, or modified to run Web scripts on Web pages.

Answer option A is incorrect. The accounting template is used for numbering months of a financial year to period numbering. It is used to compare month to month, actual v budget, quarter to quarter, year to year variances. It is the initial point for other reports that need the use of months.

Question No: 6

You work as an Office Assistant for Blue Well Inc. The company has a Windows-based network. You are creating a chart in Excel 2010. You want to show the slope of data points in the chart to know the trend of the Business Intelligence data range. Which of the following will you use to accomplish the task?

  1. Trendline

  2. Sparkline

  3. Backstage view

  4. Line charts

Answer: A Explanation:

A trendline is defined in Excel 2010. It is a data visualization tool to display the trend of a particular data range. It is used toshowthe slope ofdatapoints in a chart. There are varioustypes of trendlines, such as linear trendlines, exponential trendlines, and linear forecast trendlines.

Answer option B is incorrect. A sparkline is defined as a tiny chart in the background of a cell.

Unlike charts on an Excel worksheet, sparklines are not objects. It is used because data presented

in a row or column is useful, but patterns can be hard to spot at a glance. It is used to display a

trend based on adjacent data in a clear and compact graphical representation by taking up a small

amount of space.Thebenefitofusingthesparklinesisthatthesecanbeprintedwhen auserprintsa worksheet that contains them. This feature is not available in charts.

Answer option C is incorrect. The Microsoft Office Backstage view is used to replace the traditional file menu with a new approach that uses In and Out features for efficiency. The improved Ribbon enables users to access their preferred commands rapidly and create custom tabs to personalize the way they work.Answer option D is incorrect. Excel provides a column chart facility to display data that is arranged in columns or rows on a worksheet. Line charts are used to display continuous data over time, set against a common scale. In a line chart, category data is distributed along the horizontal axis, and all value data is distributed along the vertical axis. Line charts are ideal for showing trends in data at equal intervals.

Ensurepass 2017 PDF and VCE

C:\Documents and Settings\Administrator\Desktop\1.JPG

A line chart should be used where category labels are text, and are representing evenly spaced

values such as months, quarters, or years.

Question No: 7

You work as an Office Assistant for Dreams Unlimited Inc. You use Microsoft Excel 2010 for creating various types of reports. You have created a report in the format given below:

In the A7 cell, you are required to put a formula so that it can fulfill the description provided in the B7 cell.

Which of the following formulas will provide the required result?

  1. COUNTIF(B2:C5,quot;=Yesquot;)

  2. COUNTIFS(B2:C5,quot;=Yesquot;)

  3. COUNTIF(B2:B5,quot;=Yesquot;,C2:C5,quot;=Yesquot;)

  4. COUNTIFS(B2:B5,quot;=Yesquot;,C2:C5,quot;=Yesquot;)

Answer: D Explanation:

In order to get the required result, you will have to insert the following formula in the B7 cell: COUNTIFS(B2:B5,quot;=Yesquot;,C2:C5,quot;=Yesquot;)

Only Sarah and David have exceeded their January and February quotas, therefore the formula will provide 2 as the result.

Answer option C is incorrect. The COUNTIF function of Excel does not support multiple criteria.

Answer options A and B are incorrect. This formula will count all the cells that have the value

quot;Yesquot; in the range B2:C5.As multiple criteria arenot applied in the formula, it will provide 6 as the result.

In the A7 cell, you are required to put a formula so that it can fulfill the description provided in theB7 cell.

Which of the following formulas will provide the required result?

  1. COUNTIF(B2:C5,quot;=Yesquot;)

  2. COUNTIFS(B2:C5,quot;=Yesquot;)

  3. COUNTIF(B2:B5,quot;=Yesquot;,C2:C5,quot;=Yesquot;)

  4. COUNTIFS(B2:B5,quot;=Yesquot;,C2:C5,quot;=Yesquot;) Answer: D

In order to get the required result, you will have to insert the following formula in the B7 cell: COUNTIFS(B2:B5,quot;=Yesquot;,C2:C5,quot;=Yesquot;)

Only Sarah and David have exceeded their January and February quotas, therefore the formula will provide 2 as the result.

Answer option C is incorrect. The COUNTIF function of Excel does not support multiple criteria.

Answer options A and B are incorrect. This formula will count all the cells that have the value

quot;Yesquot; in the range B2:C5.As multiple criteria are not applied in the formula, it will provide 6 as

the result.

Question No: 8

You work as an Office Assistant for Blue Well Inc. The company has a Windows-based network. You want to filter data in a PivotTable report without opening drop-down lists to find the items that you want to filter. For this purpose, you are using a slicer. After filtering the data, you want to delete the slicer. Which of the following steps can you take to accomplish the task?

Each correct answer represents a complete solution. Choose all that apply.

  1. Click the slicer that you want to delete on the Options tab in the Slicer type group.

  2. Click the Macro setting, and then delete the slicer from the Macro-enabled slicers list.

  3. Click the slicer, and then press Delete.

  4. Right-click the slicer, and then click Remove lt;Name of slicergt;.

Answer: C,D

Explanation:

Take one of the following steps to delete a slicer:

1.Right-click the slicer, and then click Remove lt;Name of slicergt;. 2.Click the slicer, and then press Delete.

Answer options B and A are incorrect. These are invalid answer options.

Question No: 9

You work as a Finance Manager for Blue Well Inc. The company has a Windows-based network. You are using Excel spreadsheet for maintaining financial budget and other financial calculations. You want to return the depreciation of an asset for a specified period by using the fixed-declining balance method and to return the future value of a starting principal after applying a series of compound interest rates.

Which of the following financial functions will you use to accomplish the task? Each correct answer represents a complete solution. Choose all that apply.

  1. DB function

  2. NPV function

  3. DDB function

  4. FVSCHEDULE function

Answer: A,D Explanation:

Various financial functions (reference) are as follows:

  1. ACCRINT function:Itisused toreturntheaccruedinterest forasecuritythatpays periodic interest.

  2. ACCRINTM function: It is used to return the accrued interest for a security that pays interest atmaturity.

  3. AMORDEGRC function: It is used to return the depreciation for each accounting period by using a depreciation coefficient.

  4. COUPDAYBS function: It is used to return the number of days from the beginning of the coupon period to the settlement date.

  5. AMORLINC function: It is used to return the depreciation for each accounting period. 6.COUPDAYS function: It is used to return the number of days in the coupon period containing the settlement date.

  1. COUPDAYSNC function: It is used to return the number of days from the settlement date

    to the next coupon date.

  2. COUPNCD function: It is used to return the next coupon date after the settlement date. 9.COUPNUM function: It is used to return the number of coupons payable between the settlement date and maturity date.

  1. COUPPCD function: It is used to return the previous coupon date before the settlement date.

  2. CUMIPMT function: It is used to return the cumulative interest paid between two periods.

  3. CUMPRINC function: It is used to return the cumulative principal paid on a loan between two periods.

  4. DB function: It is used to return the depreciation of an asset for a specified period by using

    the fixed-declining balance method.

  5. DDB function: It is used to return the depreciation of an asset for a particular period by using

    the double-declining balance method.

  6. DISC function: It is used to return the discount rate for a security.

  7. DOLLARDE function: It is used to convert a dollar price that is expressed as a fraction into a

    dollar price that is expressed as a decimal number.

  8. DOLLARFR function: It is used to convert a dollar price that is expressed as a decimal number into a dollar price that is expressed as a fraction.

  9. DURATION function: It is used to return the annual duration of a security with periodic interest payments.

  10. EFFECT function: It is used to return the effective annual interest rate. 20.FV function: It is used to return the future value of an investment.

  1. FVSCHEDULE function: It is used to return the future value of a starting principal after applying a series of compound interest rates.

  2. INTRATE function: It is used to return the interest rate for a fully invested security. 23.IPMT function: It is used to return the interest payment for an investment for a specified period.

24.IRR function: It is used to return the internal rate of return for a series of cash flows. 25.ISPMTfunction:Itisusedtocalculatetheinterestpaidduringaparticular

periodofan investment.

  1. MDURATION function: It is used to return the Macauley modified duration for a security with an assumed par value of $100.

  2. MIRR function: It is used to return the internal rate of return in which positive and negative

    cash flows are financed at different rates.

  3. NOMINAL function: It is used to return the annual nominal interest rate.

  4. NPER function: It is used to return the number of periods for an investment.

  5. NPV function: It is used to return the net present value of an investment on the basis of a

    series of periodic cash flows and a discount rate.

  6. ODDFPRICE function: It is used to return the price per $100 face value of a security with an odd first period.

  7. ODDFYIELD function: It is used to return the yield of a security with an odd first period. 33.ODDLPRICE function: It is used to return the price per $100 face value of a security with an odd last period.

34.ODDLYIELD function: It is used to return the yield of a security with an odd last period. 35.PMT function: It is used to return the periodic payment for an annuity.

  1. PPMT function: It is used to return the payment on the principal for an investment for a particular defined period.

  2. PRICE function: It is used to return the price per $100 face value of a security that pays Periodicinterest.

  3. PRICEDISC function: It is used to return the price per $100 face value of a discounted security.

  4. PRICEMAT function: It is used to return the price per $100 face value of a security that pays

    interest at maturity.

  5. PV function: It is used to return the current value of an investment. 41.RATE function: It is use d to return the interest rate per period of an annuity.

  1. RECEIVED function: It is used to return the amount received at maturity for a fully invested

    security.

  2. SLN function: It is used to return the straight-line depreciation of an asset for one period. 44.SYD function: It is used to return the sum-of-years#39; digits depreciation of an asset for a particular period.

45.TBILLEQ function: It is used to return the bond-equivalent yield for a Treasury bill. 46.TBILLPRICE function: It is used to return the price per $100 face value for a Treasury bill.

  1. TBILLYIELD function: It is used to return the yield for a Treasury bill.

  2. VDB function: It is used to return the depreciation of an asset for a specified or partial period by using a declining balance method.

  3. IRR function: It is used to return the internal rate of return for a schedule of cash flows that is not necessarily periodic.

  4. XNPV function: It is used to return the net present value for a schedule of cash flows that is

    not necessarily periodic.

  5. YIELD function: It is used to return the yield on a security that pays periodic interest.

  6. YIELDDISC function: It is used to return the annual yield for a discounted security. 53.YIELDMAT function:It isused to return theannualyield ofa securitythat paysinterest at maturity.

    Question No: 10

    Jack wants the rows containing the name Tom and product Jam. There are thousands of entries in the log. Plowing through all the records will be time taking. Which option can be used to view only the relevant records?

    1. Autofilter

    2. Find

    3. Sort

    4. All filter

Answer: A Explanation:

Autofilter is used to filter the record as per the condition by hiding the rest. Defining different

filters, you can compare data in multiple ways, so you can glean vital information without wasting vital time.

Answer options B and D are incorrect. There are no such options defined in Excel to filter the

records.

Answer options C is incorrect. The Sort function is used to arrange the records in ascending or

descending order.

100% Free Download!
Download Free Demo:77-888 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 77-888 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE