[Free] 2018(Jan) EnsurePass Dumpsleader Microsoft 70-743 Dumps with VCE and PDF 31-40

EnsurePass
2018 Jan Microsoft Official New Released 70-743
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-743.html

Upgrading Your Skills to MCSA: Windows Server 2016

Question No: 31

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

On Server1, you have the following zone configuration

Ensurepass 2018 PDF and VCE

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4.

Server1 must resolve queries from all other DNS clients.

Solution: From Windows PowerShell on Server1, you run the Export- DnsServerDnsSecPublicKey cmdlet.

Does this meet the goal?

  1. Yes

  2. No

Answer: B

Question No: 32 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016.

You install IP Address Management (IPAM) on Server1. You select the automatic provisioning method, and then you specify a prefix of IPAM1.

You need to configure the environment for automatic IPAM provisioning.

Which cmdlet should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 33

You have a server named Server1.

You enable BitLocker Drive Encryption (BitLocker) on Server1.

You need to change the password for the Trusted Platform Module (TPM) chip. What should you run on Server1?

  1. Initialize-Tpm

  2. Import-TpmOwnerAuth

  3. repair-bde.exe

  4. bdehdcfg-exe

Answer: B

Question No: 34 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2, Server3, and Server 4 have the DHCP Server role installed. IPAM manages Server2, Server3, and Server4.

A domain user named User1 is a member of the groups shown in the following table.

Ensurepass 2018 PDF and VCE

Which actions can User1 perform? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Box 1: Can be performed by User1

DHCP Administrators can create DHCP scopes. Box 2: Cannot be performed by User1

DHCP Users cannot create scopes. Box 3: Cannot be performed by User1 IPAM users cannot creates copes.

References: https://technet.microsoft.com/en- us/library/dn741281(v=ws.11).aspx#create_access_scope

Question No: 35 DRAG DROP

Your network contains two Hyper-V servers named Server1 and Server2. Server1 has Windows 2012 R2 installed. Server2 has Windows Server 2016 installed.

You perform a live migration of a virtual machine named VM1 from Server1 to Server2. You need to create a production checkpoint for VM1 on Server2.

What three Windows PowerShell cmdlets should you run in sequence? To answer, move

the appropriate cmdlets from the list of actions to the answer area and arrange them in the correct order.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

We need to update the VM Version to enable the Production Checkpoints feature.

Step 1: Stop-VM

The virtual machine should be shut down before upgrading it. Step 2. Update-VMVersion

To upgrade the virtual machine configuration version by using Windows PowerShell, use the Update-VMVersion cmdlet.

Step 3: CheckPoint-VM

The Checkpoint-VM cmdlet creates a checkpoint of a virtual machine. Note: There is no Upgrade-VMVersion cmdlet

Question No: 36

You have a Hyper-V host that runs Windows Server 2016. The host contains a virtual machine named VM1. VM1 has resource metering enabled.

You need to use resource metering to track the amount of network traffic that VM1 sends to the 10.0.0.0/8 network.

Which cmdlet should you run?

  1. New-VMResourcePool

  2. Set-VMNetworkAdapter

  3. Add-VMNetworkAdapterAcl

  4. Set-VMNetworkAdapterRoutingDomainMapping

Answer: C Explanation:

References:

https://technet.microsoft.com/itpro/powershell/windows/hyper-v/add-vmnetworkadapteracl

Question No: 37 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.

You create a domain user account named User1.

You need to ensure that User1 can use IPAM to manage DHCP.

Which command should you run on Server1? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 38 HOTSPOT

You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host.

You run the commands shown in the following graphic:

Ensurepass 2018 PDF and VCE

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 39 DRAG DROP

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016.

You install IP Address Management (IPAM) on Server1.

You need to manually start discovery of servers that IPAM can manage in contoso.com.

Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Step 1: Invoke-IpamServerProvisioning Choose a provisioning method

The Invoke-IpamGpoProvisioning cmdlet creates and links three group policies specified in the Domain parameter for provisioningrequired access settingson the server roles managed by the computer running the IP Address Management (IPAM) server.

Step 2: Add-IpamDiscoveryDomain Configure the scope of discovery

The Add-IpamDiscoveryDomain cmdlet adds an Active Directory discovery domain for an IP AddressManagement (IPAM) server. A discovery domain is a domain that IPAM searches to find infrastructure servers. An IPAM server uses the list of discovery domains to determine what type of servers to add. By default, IPAM discovers all domain controllers, Dynamic Host Configuration Protocol (DHCP) servers, and Domain Name System (DNS) servers.

Step 3: Start-ScheduledTask Start server discovery

To begin discovering servers on the network, click Start server discovery to launch the IPAM ServerDiscovery task or use the Start-ScheduledTask command.

Question No: 40

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.

Contoso.com has the following configuration:

Ensurepass 2018 PDF and VCE

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.

You need to configure Active Directory to support the planned deployment. Solution: You run adprep.exe from the Windows Server 2016 installation media. Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

Device registration requires a forest functional level of Windows Server 2012 R2.

New installations of AD FS 2016 require the Active Directory 2016 schema (minimum version 85).

References:

https://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx https://technet.microsoft.com/en-us/windows-server-docs/identity/ad- fs/operations/configure-device-based-conditional-access-on-premises

100% Free Download!
Download Free Demo:70-743 Demo PDF
100% Pass Guaranteed!
Download 2018 EnsurePass 70-743 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 EnsurePass IT Certification PDF and VCE

[Free] 2018(Jan) EnsurePass Dumpsleader Microsoft 70-743 Dumps with VCE and PDF 41-50

EnsurePass
2018 Jan Microsoft Official New Released 70-743
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-743.html

Upgrading Your Skills to MCSA: Windows Server 2016

Question No: 41

You have a server that runs Windows Server 2016.

The server contains a storage pool named Pool1. Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4, and Disk5.

A virtual disk named VirtualDisk1 is stored in Pool1. VirtualDisk1 uses the parity storage layout.

Disk3 fails.

You need to remove Disk3 from Pool1.

Which two commands should you run? Each correct answer presents part of the solution.

  1. Update-StoragePool -FriendlyName Pool1

  2. Set-ResiliencySetting -StoragePool Pool1 -PhysicalDiskRedundancyDefault 4

  3. Reset-PhysicalDisk -FriendlyName Disk3

  4. Remove-PhysicalDisk -FriendlyName Disk3

  5. Set-PhysicalDisk -FriendlyName Disk3 -Usage Retired

Answer: D,E

Question No: 42

You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 are connected to the same network.

On Server1 and Server2, you create an external network switch named Switch1. You have the virtual machines shown in the following table.

Ensurepass 2018 PDF and VCE

All three virtual machines are connected to Switch1.

You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.

What should you do?

  1. On Server2, configure the VLAN ID setting of Switch1.

  2. On Server2, create an external switch and connect VM3 to the switch.

  3. Modify the subnet mask of VM1 and VM2.

  4. Configure network virtualization for VM1 and VM2.

Answer: D

Question No: 43 HOTSPOT

Your network contains an Active Directory forest. The forest contains two domain controllers named DC1 and DC2 that run Windows Server 2016. DC1 holds all of the operations master roles.

DC1 experiences a hardware failure.

You plan to use an automated process that will create 1,000 user accounts. You need to ensure that the automated process can complete successfully.

Which command should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Box 1: Move-ADDirectoryServerOperationMasterRole

Box 2: RIDMaster

Box 3: -Force

Question No: 44 DRAG DROP

You have a server that runs Windows Server 2016. You install three additional disks named Disk1, Disk2, and Disk3. You plan to use these physical disks to store data.

You need to create a volume to store data. The solution must prevent data loss in the event of a single disk failure.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Step 1: Create a Storage Pool

First we create a Storage Pool. We specify which disks should be included in the storage pool.

Example:

Ensurepass 2018 PDF and VCE

Step 2: Create a Virtual Disk

After creating the storage pool now start creating a virtual disk for the pool you had created.

Ensurepass 2018 PDF and VCE

Step 3: Create a Volume

After creating the virtual disk, create a volume with the NewVolume Wizard. You create the volume on the Virtual Disk you created in Step 2.

Ensurepass 2018 PDF and VCE

References: http://www.tactig.com/create-a-storage-pool-windows-server/

Question No: 45 HOTSPOT

You have a virtual machine named VM1 that runs Windows Server 2016. VM1 is a Remote Desktop Services (RDS) server.

You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network.

Which command should you run on the Hyper-V host? To answer, select the appropriate

options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

References:

https://technet.microsoft.com/en-us/library/dn464289.aspx

Question No: 46 HOTSPOT

Your network contains an Active Directory forest named contoso.com.

Your company has a custom application named ERP1. ERP1 uses an Active Directory Lightweight Directory Services (AD LDS) server named Server1 to authenticate users.

You have a member server named Server2 that runs Windows Server 2016. You install the Active Directory Federation Services (AD FS) server role on Server2 and create an AD FS farm.

You need to configure AD FS to authenticate users from the AD LDS server.

Which cmdlets should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

To configure your AD FSfarm to authenticate users from an LDAP directory, you can complete the following steps:

Step 1: New-AdfsLdapServerConnection

First, configure a connection to your LDAP directory using the New- AdfsLdapServerConnection cmdlet:

$DirectoryCred = Get-Credential

$vendorDirectory = New-AdfsLdapServerConnection -HostName dirserver -Port 50000-SslMode None -AuthenticationMethod Basic -Credential $DirectoryCred

Step 2 (optional):

Next, you can perform the optional step of mapping LDAP attributes to the existing AD FS claims using the New-AdfsLdapAttributeToClaimMapping cmdlet.

Step 3: Add-AdfsLocalClaimsProviderTrust

Finally, you must register the LDAP store with AD FS as a local claims provider trust using the Add-AdfsLocalClaimsProviderTrust cmdlet:

Add-AdfsLocalClaimsProviderTrust -Name “Vendors” -Identifier “urn:vendors” -Type L References: https://technet.microsoft.com/en-us/library/dn823754(v=ws.11).aspx

Question No: 47 HOTSPOT

You have an Active Directory domain named Contoso.com. The domain contains Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The Hyper-V hosts are configured to use NVGRE for network virtualization.

You have six virtual machines that are connected to an external switch. The virtual machines are configured as shown.

Ensurepass 2018 PDF and VCE

To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

The GRE keys must match.

To separate the traffic between the two virtualized networks, the GRE headers on the tunneled packets include a GRE Key that provides a unique Virtual Subnet ID for each virtualized network.

References:

https://blogs.technet.microsoft.com/keithmayer/2012/10/08/step-by-step-hyper-v-network- virtualization-31-days-of-favorite-features-in-winserv-2012-part-8-of-31/

Question No: 48 HOTSPOT

You have a server named Server1 that runs Windows Server 2016 and has a Hyper-V server role installed.

You open Disk Management on Server1 as shown in the following graphic.

Ensurepass 2018 PDF and VCE

You plan to configure Disk 13 as a pass-through disk for a generation 1 virtual machine.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 49 DRAG DROP

You have a Hyper-V host named Server1 that runs Windows Server 2016.

The installation source files for Windows Server 2016 are located in D:\Source. You need to create a Nano Server image.

Which cmdlets should you run? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bat between panes or scroll to view content.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Step 1: Import Module

Import-Module .\NanoServerImageGenerator.psm1 Step 2: New New-NanoServerImage

Create Nano Server Image VHDX

New-NanoServerImage -MediaPath .\Files -BasePath.\Base -TargetPath

.\Images\NanoVMGA.vhdx

References: https://technet.microsoft.com/en-us/windows-server-docs/get-started/deploy- nano-server

Question No: 50

You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.

You need to ensure that the traffic is distributed evenly among the virtual machines that host App1.

What should you include in the environment?

  1. Network Controller and Windows Server Software Load Balancing (SLB) nodes

  2. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

  3. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes

  4. Network Controller and Windows Server Network Load Balancing (NLB) nodes

Answer: A Explanation:

References:

https://technet.microsoft.com/en-us/library/mt632286.aspx

100% Free Download!
Download Free Demo:70-743 Demo PDF
100% Pass Guaranteed!
Download 2018 EnsurePass 70-743 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 EnsurePass IT Certification PDF and VCE

[Free] 2018(Jan) EnsurePass Dumpsleader Microsoft 70-743 Dumps with VCE and PDF 51-60

EnsurePass
2018 Jan Microsoft Official New Released 70-743
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-743.html

Upgrading Your Skills to MCSA: Windows Server 2016

Question No: 51 HOTSPOT

You have a server named Server1 that runs Windows Server 2016. Server1 has the Web Application Proxy role service installed.

You are publishing an application named App1 that will use Integrated Windows authentication as shown in the following graphic.

Ensurepass 2018 PDF and VCE

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Publish an Integrated Windows authenticated-based Application for WebBrowser Clients Step 1: (configure the Backend server SPN – see first bulleted item below)

Before you begin, make sure that you have done the following:

Step 2: http//server2.contoso.com/publish/app1 Use the same URL as the backend server URL.

Web Application Proxy can translate host names in URLs, but cannot translate path names. Therefore, you can enter different host names, but you must enter the same path name. For example, you can enter an external URL of https://apps.contoso.com/app1/ and a backend server URL of http://app-server/app1/. However, you cannot enter an external URL of https://apps.contoso.com/app1/ and a backend server URL of

https://apps.contoso.com/internal-app1/.

References: https://technet.microsoft.com/en-us/library/dn383640(v=ws.11).aspx

Question No: 52

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1.

You need to provide VM1 with direct access to a graphics processing unit (GPU) on Server1.

What should you do first?

  1. OnVM1, install the Quality Windows Audio Video Experience (qWave) feature.

  2. Disable the display adapter device on Server1.

  3. In the settings of VM1, add a RemoteFX 3D Video Adapter.

  4. Dismount the display adapter on Server1.

Answer: B Explanation:

Before the physical device is allowed to be passed through to the VM, the device must be disabled on the host system. The physical device must be accessible/available exclusively to the VM only.

References: Introduction to Windows Server 2016 Hyper-V DiscreteDevice Assignment, page 5

https://lenovopress.com/lp0088.pdf

Question No: 53

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.

Solution: From a command prompt, you run netdom query fsmo. Does this meet the goal?

  1. Yes

  2. No

Answer: A Explanation:

References: https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out- who-has-your-fsmo-roles/

Question No: 54 HOTSPOT

You have a Hyper-V host that runs Windows Server 2016. The Hyper-V host has a virtual machine named VM1.

You have a VHD named VHD1.vhdx that has a generalized image of Windows Server 2016.

You plan to create multiple virtual machines that will use the generalized image. You need to create differencing disks based on VHD1.vhdx.

What command should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

References:

https://technet.microsoft.com/en-us/itpro/powershell/windows/hyper-v/new-vhd

Question No: 55

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.

Contoso.com has the following configuration:

Ensurepass 2018 PDF and VCE

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.

You need to configure Active Directory to support the planned deployment. Solution: You raise the forest functional level to Windows Server 2012 R2. Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

For a Windows Server 2012 R2 AD FS server, this solution would work. However, new installations of AD FS 2016 require the Active Directory 2016 schema (minimum version 85).

References: https://technet.microsoft.com/en-us/windows-server-docs/identity/ad- fs/operations/configure-device-based-conditional-access-on-premises

Question No: 56

You have an Active Directory domain named contoso.com.

The computers in contoso.com are installed by using Windows Deployment Services.

You have a server named Server1 that runs Windows Server 2016. Server1 is a member of contoso.com. Server1 has the Hyper-V role installed. Virtual machines on Server1 are connected to an external switch named Switch1.

You create a virtual machine named VM1 on Server1 by running the following cmdlets.

Ensurepass 2018 PDF and VCE

You need to ensure that you can install the operating system on VM1 by using Windows Deployment Services.

What should you do?

  1. Add a legacy network adapter to VM1.

  2. Modify the SwitchType parameter of Switch1.

  3. Modify the DefaultFlowMinimumBandwidthWeigth parameter of Switch1.

  4. Add a SCSI controller to VM1.

Answer: A Explanation:

A legacy network adapter is required for PXE boot.

Not B: The switch is an External switch which is what is required.

Question No: 57

Active Directory Recycle Bin is enabled. You discover that a support technician accidentally removed 100 users from an Active Directory group named Group1 an hour ago. You need to restore the membership of Group1.

What should you do?

  1. Perform tombstone reanimation.

  2. Export and import data by using Dsamain.

  3. Perform a non-authoritative restore.

  4. Recover the items by using Active Directory Recycle Bin.

Answer: B Explanation:

A group has been modified. Nothing has been deleted. Therefore, answers A and D will not work. Answer C would work if it was an authoritative restore, but not a non-authoritative restore.

The solution is to recover an earlier copy of the group from a backup or active directory snapshot by using DSadmain.

Question No: 58

You create a Nano server image named Nano1.vhdx by using the New-NanoServerImage cmdlet.

You attach Nano1.vhdx to a Generation 1 virtual machine named Nano1.

When you start Nano1, you get the following error message: “Boot failure. Reboot and select proper Boot device or Insert Boot Media in selected Boot device”

You need to successfully start Nano server.

What should you do?

  1. Attach Nano1.vhdx to a SCSIcontroller.

  2. Recreate Nano1 as a Generation 2 virtual machine.

  3. Increase the memory of Nano1 to 512 Mb.

  4. Modify the BIOS settings of Nano1.

Answer: B Explanation:

A Generation 1 VM cannot boot from a vhdx disk; only a Generation 2 VM can boot from an vhdx disk.

Question No: 59 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 and a member server named Server2.

Server1 has the DNS Server role installed. Server2 has IP Address Management (IPAM) installed. The IPAM server retrieves zones from Server1 as shown in the following table.

Ensurepass 2018 PDF and VCE

The IPAM server has one access policy configured as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Box 1: Yes

As a member of the IPAM DNS Administrator Role of the ADatum zone, User1 can add DNS records to it.

Box 2: Yes

As a member of the DNS Record Administrator Role of the Fabrikam zone, User1 can add DNS records to it.

Box 3: No

DNS Record Administrators cannot delete zones, only administer DNS records. References: https://technet.microsoft.com/en-us/library/hh831353(v=ws.11).aspx

Question No: 60

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. The servers have the same hardware configuration.

You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?

  1. Install the Failover Clustering feature and create a new cluster resource group.

  2. Run Set-DfsrServiceConfiguration and specify the -RPCPort parameter.

  3. Run New-SRPartnership and specify the -ReplicationMode parameter.

  4. Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).

Answer: A Explanation:

Deploy Stretch Cluster with Volume Replication by implementing the following steps:

References: https://www.starwindsoftware.com/blog/how-to-configure-storage-replication- using-windows-server-2016-part-2

100% Free Download!
Download Free Demo:70-743 Demo PDF
100% Pass Guaranteed!
Download 2018 EnsurePass 70-743 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 EnsurePass IT Certification PDF and VCE

[Free] 2018(Jan) EnsurePass Dumpsleader Microsoft 70-743 Dumps with VCE and PDF 61-70

EnsurePass
2018 Jan Microsoft Official New Released 70-743
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-743.html

Upgrading Your Skills to MCSA: Windows Server 2016

Question No: 61 HOTSPOT

Your network contains an Active Directory forest. The forest contains two sites named Site1 and Site2. Site1 contains 10 domain controllers. Site1 and Site2 connect to each other by using a WAN link.

You run the Active Directory Domain Services Configuration Wizard as shown in the following graphic.

Ensurepass 2018 PDF and VCE

Server3 is the only server in Site2.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Box1: stop and start the Active Directory Domain Services (AD DS)

Box 2: Can log on if they have previously logged on.

By selectively caching credentials, RODCs address some of the challenges that enterprises can encounter in branch offices and perimeter networks (also known as DMZs) that may lack the physical security that is commonly found in datacenters and hub sites.

Question No: 62 HOTSPOT

You have a four-node Hyper-V cluster named Cluster1.

A virtual machine named VM1 runs on Cluster1. VM1 has a network adapter that connects to a virtual switch named Network1.

You need to prevent a network disconnection on VM1 from causing VM1 to move to another cluster node.

What command should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 63

You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.

You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

  1. Run the sc control command.

  2. Run the New-NetFirewallRule cmdlet.

  3. Modify the routing table on Server1.

  4. Run the sc config command.

Answer: D Explanation:

References:

https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage- docker/configure-docker-daemon

Question No: 64

You have a server named Server1 that runs Windows Server 2016. You need to configure Server1 as a Web Application Proxy.

Which server role or role service should you install on Server1?

  1. Web Server (IIS)

  2. Network Policy and Access Services

  3. Direct Access and VPN (RAS)

  4. Active Directory Federation Services

  5. Remote Access

Answer: E

Question No: 65 DRAG DROP

Your network contains an Active Directory domain. The domain contains two domain controllers named DC1 and DC2. DC2 is a virtual machine that is hosted on a Hyper-V host named HyperV1. DC1 holds the PDC emulator operations master role.

You need to create a new domain controller named DC3 by using domain controller cloning.

Which five actions should you perform in sequence before you can import the cloned virtual machine? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 66 HOTSPOT

Your company has a main office and a branch office. The two offices connect to each other by using a WAN link.

Your network contains an Active Directory forest named contoso.com. The forest contains a domain controller named DC1. All of the domain controllers are located in the main office.

You install a read-only domain controller (RODC) named RODC1 in the branch office.

You create a user account for a new user named User1. You add User1 to the Allowed RODC Password Replication Group. User1 starts work on Monday.

You are notified that the WAN link will be down for maintenance on Monday. You need to ensure that User1 can log on in the branch office site on Monday.

Which command should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

References:

https://technet.microsoft.com/en-us/library/cc742095(v=ws.11).aspx

Question No: 67

You have an Active Directory domain that contains several Hyper-V hosts that run Windows Server 2016.

You plan to deploy network virtualization and to centrally manage Datacenter Firewall policies.

Which component must you install for the planned deployment?

  1. the Routing role service

  2. the Canary Network Diagnostics feature

  3. the Network Controller server role

  4. the Data Center Bridging feature

Answer: C Explanation:

Using Windows PowerShell, the REST API, or a management application, you can use

Network Controller to manage the following physical and virtual network infrastructure: References: https://technet.microsoft.com/en-us/library/dn859239.aspx

Question No: 68

You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.

You need to ensure that members of a security group named Docker Administrators can administer Docker.

What should you do?

  1. Run theSet-Service cmdlet.

  2. Modify the Security settings of Dockerd.exe.

  3. Edit the Daemon.json file.

  4. Modify the Security settings of Docker.exe.

Answer: C Explanation:

References:

https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage- docker/configure-docker-daemon

Question No: 69

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.

Solution: You open Active Directory Domains and Trusts, right-click Active Directory Domains and Trust in the console tree, and then click Operations Master.

Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

This solution only shows the Domain Naming Master.

Question No: 70 DRAG DROP

You have a network that contains several servers that run Windows Server 2016.

You need to use Desired State Configuration (DSC) to configure the servers to meet the following requirements:

How should you configure the DSC recourses? To answer, drag the appropriate values to the correct locations. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Box 1: WindowsFeature

The WindowsFeature resource in Windows PowerShell Desired State Configuration (DSC) provides a mechanism to ensure that roles and features are added or removed on atarget node.

Box 2: Present

The Ensure Property indicates if the role or feature is added. To ensure that the role or feature is added, set this property to quot;Presentquot; To ensure that the role or feature is removed, set the property to quot;Absentquot;.

Example:

WindowsFeature RoleExample

{

Ensure = quot;Presentquot;

# Alternatively, to ensure the role is uninstalled, set Ensure to quot;Absentquot; Name = quot;Web-Serverquot;# Use the Name property from Get-WindowsFeature

}

Box 3: Service

The Service resource in Windows PowerShell Desired State Configuration (DSC) provides a mechanism to manage services on the target node.

Box 4: Running

The State property indicates the state, either Running or Stopped, you want to ensure for the service.

References:

https://msdn.microsoft.com/en-us/powershell/dsc/windowsfeatureresource https://msdn.microsoft.com/en-us/powershell/dsc/serviceresource

100% Free Download!
Download Free Demo:70-743 Demo PDF
100% Pass Guaranteed!
Download 2018 EnsurePass 70-743 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 EnsurePass IT Certification PDF and VCE

[Free] 2018(Jan) EnsurePass Dumpsleader Microsoft 70-743 Dumps with VCE and PDF 11-20

EnsurePass
2018 Jan Microsoft Official New Released 70-743
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-743.html

Upgrading Your Skills to MCSA: Windows Server 2016

Question No: 11 HOTSPOT

Your network contains an Active Directory forest. The forest contains one domain named contoso.com. The domain contains two domain controllers named DC1 and DC2. DC1 holds all of the operations master roles.

During normal network operations, you run the following commands on DC2:

Ensurepass 2018 PDF and VCE

DC1 fails.

You remove DC1 from the network, and then you run the following command:

Ensurepass 2018 PDF and VCE

For each of the following statements, select Yes if the statement if true. Otherwise, select No.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 12 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.

The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.

Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

The DHCP scopes are configured as shown in the Scopes exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 13

You deploy a Hyper-V server named Server1 in an isolated test environment. The test environment is prevented from accessing the Internet. Server1 runs the Datacenter edition of Windows Server 2016.

You plan to deploy the following guest virtual machines on the server:

Ensurepass 2018 PDF and VCE

Which activation model should you use for the virtual machines?

  1. Multiple Activation Key (MAK)

  2. Key Management Service (KMS)

  3. Original Equipment Manufacturer (OEM) key

  4. Automatic Virtual Machine Activation (AVMA)

Answer: D Explanation:

On virtualization servers that are activated using Volume Licensing or OEM licensing, AVMA offers several benefits.

Server datacenter managers can use AVMA to do the following:

Note: AVMA requires a Microsoft Virtualization Server running Windows Server 2012 R2Datacenter or Windows Server 2016 Datacenter.

Question No: 14

You have a Nano Server named Nano1.

You deploy several containers to Nano1 that use an image named Image1. You need to deploy a new container to Nano1 that uses Image1.

What should you run?

  1. the Install-WindowsFeature cmdlet

  2. the docker run command

  3. the docker load command

  4. the Install-NanoServerPackage cmdlet

Answer: B Explanation:

When an operator executes docker run, the container process that runs is isolated in that it has its own file system, its own networking, and its own isolated process tree separate from the host.

The basic docker run command takes this form:

$ docker run [OPTIONS] IMAGE[:TAG|@DIGEST] [COMMAND] [ARG…]

Question No: 15

You have two servers named Server1 and Server2. A firewall exists between Server1 and Server2.

Both servers run Windows Server Update Services (WSUS). Server1 downloads updates from Microsoft update.

Server2 must synchronize updates from Server1. Which port should to open on the firewall?

A. 80 B. 443 C. 3389 D. 8530

Answer: D

Question No: 16 DRAG DROP

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed.

You need to integrate IPAM and VMM.

Which types of objects should you create on each server? To answer, drag the appropriate object types to the correct servers. Each object type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Server 1 (IPAM): Access Policy

VMM must be granted permission to view and modify IP address space in IPAM, and to perform remote management of the IPAM server. VMM uses a “Run As” account to provide these permissions to the IPAM network service plugin. The “Run As” account must be configured with appropriate permission on the IPAM server.

To assign permissions to the VMM user account

In the IPAM server console, in the upper navigation pane, click ACCESS CONTROL, right- click Access Policies in the lower navigation pane, and then click Add AccessPolicy.

Etc.

Server 2 (VMM) #1: Network Service Server 2 (VMM) #2: Run As Account

Perform the following procedure using the System Center VMM console. To configure VMM (see step 1-3, step 6-7)

Ensurepass 2018 PDF and VCE

Etc.

References: https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx

Question No: 17

Your network contains three Hyper-V hosts. You add all of the hosts to a cluster.

You need to create highly available storage spaces that connect to directly attached storage on the hosts.

Which cmdlet should you use?

  1. Update-ClusterVirtualMachineConfiguration

  2. Enable-ClusterStorageSpacesDirect

  3. Set-StoragePool

  4. Add-ClusterDisk

Answer: B Explanation:

The Enable-ClusterStorageSpacesDirect cmdlet enables highly available Storage Spaces that use directly attached storage Storage Spaces Direct (S2D) on a cluster.

Question No: 18 HOTSPOT

You have a DNS server named Server1.

The forwarders are configured as shown in the Forwarders exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

The Advanced Settings are configured as shown in the Advanced exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

The Root Hints are configured as shown in the Root Hints exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

Server1 does not contain any DNS zones.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Recursion is disabled so internet hosts cannot be resolved. The recursive test fails because recursion is disabled.

Server1 is not configured as a root server. The forwarders list would be greyed out if it was.

Question No: 19 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2 and Server3 have the DHCP Server role installed and have several DHCP scopes configured. The IPAM server retrieves data from Server2 and Server3.

A domain user named User1 is a member of the groups shown in the following table.

Ensurepass 2018 PDF and VCE

On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope Administrator Role with the \Global access scope to the user.

Which actions can User1 perform? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

User1 is using Server Manager, not IPAM to perform the administration. Therefore, only the “DHCP Administrators” permission on Server2 and the “DHCP Users” permissions on Server3 are applied.

The permissions granted through membership of the “IPAM DHCP Scope Administrator Role” are not applied when the user is not using the IPAM console.

Question No: 20 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.

Server1 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed. Server2 has IP Address Management (IPAM) installed.

You create a domain user named User1.

You need to integrate IPAM and VMM. VMM must use the account of User1 to manage IPAM. The solution must use the principle of least privilege.

What should you do on each server? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

References:

https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx

100% Free Download!
Download Free Demo:70-743 Demo PDF
100% Pass Guaranteed!
Download 2018 EnsurePass 70-743 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 EnsurePass IT Certification PDF and VCE

[Free] 2018(Jan) EnsurePass Dumpsleader Microsoft 70-743 Dumps with VCE and PDF 21-30

EnsurePass
2018 Jan Microsoft Official New Released 70-743
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-743.html

Upgrading Your Skills to MCSA: Windows Server 2016

Question No: 21

You need to implement network virtualization.

On which object should you configure the virtual subnet ID?

  1. Virtual switch

  2. Hyper-V server

  3. VM

  4. Virtual network adapter

Answer: A

Question No: 22

You have a Hyper-V host named Server1 that runs Windows Server 2016.

Server1 has a virtual machine named VM1. VM1 is configured to run the Docker daemon. On VM1, you have a container network that uses transparent mode.

You need to ensure that containers that run on VM1 can obtain IP addresses from DHCP. What should you do?

  1. On VM1, run docker network connect.

  2. On Server1, run docker network connect.

  3. On VM1, run Get-VMNetworkAdapter -VMName VM1 | Set-VMNetworkAdapter

    -MacAddressSpoofing On.

  4. On Server1, run Get-VMNetworkAdapter -VMName VM1 | Set-VMNetworkAdapter – MacAddressSpoofing On.

Answer: D Explanation:

If the container host is virtualized, and you wish to use DHCP for IP assignment, you must enable MACAddressSpoofing.

PS C:\gt; Get-VMNetworkAdapter -VMName ContainerHostVM | Set-VMNetworkAdapter – MacAddressSpoofing On

The command needs to be run on the Hyper-V host. References: https://msdn.microsoft.com/en-

us/virtualization/windowscontainers/management/container_networking

Question No: 23

Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. Server1 is located in the perimeter network.

You install the Active Directory Federation Services server role on Server1. You create an Active Directory Federation Services (AD FS) farm by using a certificate that has a subject name of sts.contoso.com.

You need to enable certificate authentication from the Internet on Server1.

Which two inbound TCP ports should you open on the firewall? Each correct answer presents part of the solution.

A. 389

B. 443

C. 3389

D. 8531

E. 49443

Answer: B,E Explanation:

Configuring the following network services appropriately is critical for successful deployment of AD FS in your organization:

Configuring Corporate Firewall

References: https://technet.microsoft.com/en-us/library/dn554247(v=ws.11).aspx

Question No: 24

You have a server named Server1 that runs Windows Server 2016.

You need to install the DNS Server role on Server1. What should you run?

  1. the Install-Package cmdlet

  2. the setup.exe command

  3. the dnscmd.exe command

  4. the Enable-WindowsOptionalFeature cmdlet

Answer: D

Question No: 25 HOTSPOT

You have a server named Server1 that runs Windows Server 2016. Server1 has the Web Application Proxy role service installed.

You publish an application named App1 by using the Web Application Proxy.

You need to change the URL that users use to connect to App1 when they work remotely.

Which command should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

The Set-WebApplicationProxyApplication cmdlet modifies settings of a web application published through Web Application Proxy. Specify the web application to modify by using its ID. Note that the method of preauthentication cannot be changed. The cmdlet ensures that no other applications are already configured to use any specified ExternalURL or BackendServerURL.

References: https://technet.microsoft.com/itpro/powershell/windows/wap/set- webapplicationproxyapplication

Question No: 26 HOTSPOT

You have a server named Server1 that runs Windows Server 2016 server.

Server1 has the Docker daemon configured and has a container named Container1.

You need to mount the folder C:\Folder1 on Server1 to C:\ContainerFolder in Container1.

Which command should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 27

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

On Server1, you have the following zone configuration.

Ensurepass 2018 PDF and VCE

You need to ensure that all of the client computers in the domain perform DNSSEC validation for the fabrikam.com namespace.

Solution: From Windows PowerShell on Server1, you run the Add-DnsServertrustAnchor cmdlet.

Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

The Add-DnsServerTrustAnchor command adds a trust anchor to a DNS server. A trust anchor (or trust “point”) is a public cryptographic key for a signed zone. Trust anchors must be configured on every non-authoritative DNS server that will attempt to validate DNS data. Trust Anchors have no direct relation to DSSEC validation.

References:

https://technet.microsoft.com/en-us/library/jj649932.aspx https://technet.microsoft.com/en-us/library/dn593672(v=ws.11).aspx

Question No: 28 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016.

Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. You have a highly available virtual machine named VM1. Server1 is the owner node of VM1. Server3 and Server4 are nodes of a scale-out file server named Cluster2.

The storage on Server1 is configured as shown in the following table.

Ensurepass 2018 PDF and VCE

VM1 is stored in C:\ClusterStorage\Volume1.

You need to move the virtual disk of VM1 to a different location.

What should you do? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Box 1: Failover Cluster Manager

You can use Failover Cluster Manager to do a Storage Migration to a shared folder.

Box 2: \\Cluster2\Share1

For a highly-available VM, the storage must be accessible by all nodes in the cluster. Therefore, in this scenario, we have to use the file share.

You c

References:

https://blogs.msdn.microsoft.com/clustering/2012/04/26/windows-server-2012-storage- migration-for-cluster-managed-virtual-machines/

Question No: 29

You have a server named Server1 that runs Windows Server 2016. You need to configure Server1 as a multitenant RAS Gateway.

What should you install on Server1?

  1. the Network Controller server role

  2. the Remote Access server role

  3. the Data Center Bridging feature

  4. the Network Policy and Access Services server role

Answer: B Explanation:

RAS Gateway – Multitenant. You can deploy RAS Gateway as a multitenant, software- based edge gateway and router when you are using Hyper-V Network Virtualization or you have VM networks deployed with virtual Local Area Networks (VLANs). With the RAS Gateway, CloudService Providers (CSPs) and Enterprises can enable datacenter and cloud network traffic routing between virtual and physical networks, including the Internet. With the RAS Gateway, your tenants can use point-so-site VPN connections to access their VM network resources in the datacenter from anywhere. You can also provide tenants with site-to-site VPN connections between their remote sites and your CSP datacenter. In addition, you can configure the RAS Gateway with BGP for dynamic routing, and you can enable Network Address Translation (NAT) to provide Internet access for VMs on VM networks.

References:

https://technet.microsoft.com/en-us/windows-server-docs/networking/remote- access/remote-access

Question No: 30

You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.

Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.

You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.

What should you do?

  1. From the properties of the NIC team on VM1, change the load balancing of the NIC team.

  2. From Hyper-V Manager on Server1, modify the settings of VM1.

  3. From Windows PowerShell on Server1, run the Set- VmNetworkAdapterFailoverConfigurationcmdlet.

  4. From Hyper-V Manager on Server1, modify the properties of vSwitch1.

Answer: B Explanation:

You can configure NIC teaming in the Guest OS; however, before NIC teaming will work in a virtual machine, you need to enable NIC teaming in the Advanced Features section of the VM settings.

100% Free Download!
Download Free Demo:70-743 Demo PDF
100% Pass Guaranteed!
Download 2018 EnsurePass 70-743 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 EnsurePass IT Certification PDF and VCE

[Free] 2018(Jan) EnsurePass Dumpsleader Microsoft 70-743 Dumps with VCE and PDF 1-10

EnsurePass
2018 Jan Microsoft Official New Released 70-743
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-743.html

Upgrading Your Skills to MCSA: Windows Server 2016

Question No: 1

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. IPAM is configured to use the Group Policy based provisioning method. The prefix for the IPAM Group Policy objects (GPOs) is IP.

From Group Policy Management, you manually rename the IPAM GPOs to have a prefix of IPAM.

You need to modify the GPO prefix used by IPAM. What should you do?

  1. Click Configure server discovery in Server Manager.

  2. Run the Set-IpamConfiguration cmdlet.

  3. Run the Invoke-IpamGpoProvisioning cmdlet.

  4. Click Provision the IPAM server in Server Manager.

Answer: B Explanation:

The Set-IpamConfiguration cmdlet modifies the configuration for the computer that runs the IPAM server.

The -GpoPrefixlt;Stringgt; parameter specifies the unique Group Policy object (GPO) prefix name that IPAM uses to create the group policy objects. Use this parameter only when the value of the ProvisioningMethod parameter is set to Automatic.

References: https://technet.microsoft.com/en-us/library/jj590816.aspx

Question No: 2

Your network contains an Active Directory domain. The domain contains two Hyper-V hosts.

You plan to perform live migrations between the hosts.

You need to ensure that the live migration traffic is authenticated by using Kerberos. What should you do first?

  1. From Server Manager, install the Host Guardian Service server role on a domain controller.

  2. From Active Directory Users and Computers, add the computer accounts for both servers to the Cryptographic Operators group.

  3. From Active Directory Users and Computers, modify the Delegation properties of the computer accounts for both servers.

  4. From Server Manager, install the Host Guardian Service server role on both servers.

Answer: C Explanation:

If you have decided to use Kerberos to authenticate live migration traffic, configure constrained delegation before you proceed to the rest of the steps.

To configure constrained delegation

Question No: 3

Your Network contains one Active Directory domain named contoso.com. You pilot DirectAccess on the network.

During the pilot deployment, you enable DirectAccess only for a group Contoso\Test

Computers.

Once the pilot is complete, you need to enable DirectAccess for all the client computers in the domain.

What should you do?

  1. From Windows PowerShell, run the Set-DAClient cmdlet.

  2. From Windows PowerShell, run the Set-DirectAccess cmdlet.

  3. From Active Directory Users and Computers, modify the membership of the Windows Authorization Access Group.

  4. From Group Policy Management, modify the security filtering of an object named Direct Access Client Setting Group Policy.

Answer: D

Question No: 4

You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The following virtual switches are configured on the Hyper-V hosts.

Ensurepass 2018 PDF and VCE

The following virtual machines run on the Hyper-V hosts.

Ensurepass 2018 PDF and VCE

All virtual machines have IP addresses from the 192.168.1.0/24 network. VLANs are configured in Hyper-V only. Physical switches are not configured with VLANs.

To which virtual machine or virtual machines can VM1 connect?

  1. VM2, VM3, VM5 and VM6 only

  2. VM2, VM3 and VM4 only

  3. VM2 only

  4. VM2 and VM5 only

Answer: D Explanation:

If the port is set to a specific VLAN, then that port becomes a member of that VLAN. Its frames are still untagged, but the switch will only allow that port to communicate with other devices on the same VLAN.

References: http://www.altaro.com/hyper-v/setting-up-vlans-in-hyper-v/

Question No: 5 DRAG DROP

You install a new Nano Server named Nano1. Nano1 is a member of a workgroup and has an IP address of 192.168.1.10.

You have a server named Server1 that runs Windows Server 2016.

From Server1, you need to establish a Windows PowerShell session to Nano1.

How should you complete the PowerShell script? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

How to access Nano Server

Because Nano Server does not support a local session, it must be accessed remotely. References: https://msdn.microsoft.com/en-us/library/mt708805(v=vs.85).aspx

Question No: 6

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 have the Hyper-V server role installed.

An iSCSI SAN connects to the network.

You create a LUN on the SAN and configure both servers to connect to the iSCSI target.

You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage.

You need to add the shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously.

Which tool should you use?

  1. the clussvc.exe command

  2. the cluster.exe command

  3. the Computer Management snap-in

  4. the configurehyperv.exe command

  5. the Disk Management snap-in

  6. the Failover Cluster Manager snap-in

  7. the Hyper-V Manager snap-in

  8. the Server Manager app

Answer: F Explanation:

References:

https://technet.microsoft.com/en-us/library/jj612868(v=ws.11).aspx

Question No: 7 HOTSPOT

Your network contains an Active Directory forest named contoso.com. You need to add a new domain named fabrikam.com to the forest.

What command should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

References:

https://technet.microsoft.com/en-us/library/hh974722(v=wps.630).aspx

Question No: 8

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 contains a virtual machine named VM1.

You need to ensure that you can use nested virtualization on VM1. What should you run on Server1?

  1. the Mount-VHD cmdlet

  2. the Diskpart command

  3. the Set-VHD cmdlet

  4. the Set-VMcmdlet

  5. the Set-VMHost cmdlet

  6. theSet-VMProcessor cmdlet

  7. the Install-WindowsFeature cmdlet

  8. the Optimize-VHD cmdlet

Answer: F Explanation:

Configure Nested Virtualization

Set-VMProcessor -VMName lt;VMNamegt; -ExposeVirtualizationExtensions $true Etc.

References: https://msdn.microsoft.com/en- us/virtualization/hyperv_on_windows/user_guide/nesting

Question No: 9

You have a Hyper-V host named Server1 that runs Windows Server 2016. The host has two virtual machines (VMs) named VM1 and VM2.

On the Hyper-V host, you create two virtual disks named Disk1 and Disk2. You plan to create a test environment for Storage Spaces Direct.

You need to configure the VMs to connect to the virtual disks. What should you use?

  1. An iSCSI target

  2. A virtual SCSI controller

  3. A virtual fibre channel adapter

  4. A virtual IDE controller

Answer: B Explanation:

References:

https://blogs.msdn.microsoft.com/clustering/2015/05/27/testing-storage-spaces-direct- using-windows-server-2016-virtual-machines/

Question No: 10 HOTSPOT

You have a server named Server1 that runs Windows Server 2016. Server1 has the Web Application Proxy role service installed.

You need to publish Microsoft Exchange Server 2013 services through the Web Application Proxy. The solution must use preauthentication whenever possible.

How should you configure the preauthentication method for each service? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Box 1: Pass-through

Box 2: Active Directory Federation Services (ADFS) Box 3: Pass-through

The following table describes the Exchange services that you can publish through Web Application Proxy and the supported preauthentication for these services:

Ensurepass 2018 PDF and VCE

References: https://technet.microsoft.com/en-us/library/dn528827(v=ws.11).aspx

100% Free Download!
Download Free Demo:70-743 Demo PDF
100% Pass Guaranteed!
Download 2018 EnsurePass 70-743 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 EnsurePass IT Certification PDF and VCE

[Free] 2018(Jan) EnsurePass Testinsides Microsoft 70-743 Dumps with VCE and PDF 41-50

EnsurePass
2018 Jan Microsoft Official New Released 70-743
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-743.html

Upgrading Your Skills to MCSA: Windows Server 2016

Question No: 41

You have a server that runs Windows Server 2016.

The server contains a storage pool named Pool1. Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4, and Disk5.

A virtual disk named VirtualDisk1 is stored in Pool1. VirtualDisk1 uses the parity storage layout.

Disk3 fails.

You need to remove Disk3 from Pool1.

Which two commands should you run? Each correct answer presents part of the solution.

  1. Update-StoragePool -FriendlyName Pool1

  2. Set-ResiliencySetting -StoragePool Pool1 -PhysicalDiskRedundancyDefault 4

  3. Reset-PhysicalDisk -FriendlyName Disk3

  4. Remove-PhysicalDisk -FriendlyName Disk3

  5. Set-PhysicalDisk -FriendlyName Disk3 -Usage Retired

Answer: D,E

Question No: 42

You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 are connected to the same network.

On Server1 and Server2, you create an external network switch named Switch1. You have the virtual machines shown in the following table.

Ensurepass 2018 PDF and VCE

All three virtual machines are connected to Switch1.

You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.

What should you do?

  1. On Server2, configure the VLAN ID setting of Switch1.

  2. On Server2, create an external switch and connect VM3 to the switch.

  3. Modify the subnet mask of VM1 and VM2.

  4. Configure network virtualization for VM1 and VM2.

Answer: D

Question No: 43 HOTSPOT

Your network contains an Active Directory forest. The forest contains two domain controllers named DC1 and DC2 that run Windows Server 2016. DC1 holds all of the operations master roles.

DC1 experiences a hardware failure.

You plan to use an automated process that will create 1,000 user accounts. You need to ensure that the automated process can complete successfully.

Which command should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Box 1: Move-ADDirectoryServerOperationMasterRole

Box 2: RIDMaster

Box 3: -Force

Question No: 44 DRAG DROP

You have a server that runs Windows Server 2016. You install three additional disks named Disk1, Disk2, and Disk3. You plan to use these physical disks to store data.

You need to create a volume to store data. The solution must prevent data loss in the event of a single disk failure.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Step 1: Create a Storage Pool

First we create a Storage Pool. We specify which disks should be included in the storage pool.

Example:

Ensurepass 2018 PDF and VCE

Step 2: Create a Virtual Disk

After creating the storage pool now start creating a virtual disk for the pool you had created.

Ensurepass 2018 PDF and VCE

Step 3: Create a Volume

After creating the virtual disk, create a volume with the NewVolume Wizard. You create the volume on the Virtual Disk you created in Step 2.

Ensurepass 2018 PDF and VCE

References: http://www.tactig.com/create-a-storage-pool-windows-server/

Question No: 45 HOTSPOT

You have a virtual machine named VM1 that runs Windows Server 2016. VM1 is a Remote Desktop Services (RDS) server.

You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network.

Which command should you run on the Hyper-V host? To answer, select the appropriate

options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

References:

https://technet.microsoft.com/en-us/library/dn464289.aspx

Question No: 46 HOTSPOT

Your network contains an Active Directory forest named contoso.com.

Your company has a custom application named ERP1. ERP1 uses an Active Directory Lightweight Directory Services (AD LDS) server named Server1 to authenticate users.

You have a member server named Server2 that runs Windows Server 2016. You install the Active Directory Federation Services (AD FS) server role on Server2 and create an AD FS farm.

You need to configure AD FS to authenticate users from the AD LDS server.

Which cmdlets should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

To configure your AD FSfarm to authenticate users from an LDAP directory, you can complete the following steps:

Step 1: New-AdfsLdapServerConnection

First, configure a connection to your LDAP directory using the New- AdfsLdapServerConnection cmdlet:

$DirectoryCred = Get-Credential

$vendorDirectory = New-AdfsLdapServerConnection -HostName dirserver -Port 50000-SslMode None -AuthenticationMethod Basic -Credential $DirectoryCred

Step 2 (optional):

Next, you can perform the optional step of mapping LDAP attributes to the existing AD FS claims using the New-AdfsLdapAttributeToClaimMapping cmdlet.

Step 3: Add-AdfsLocalClaimsProviderTrust

Finally, you must register the LDAP store with AD FS as a local claims provider trust using the Add-AdfsLocalClaimsProviderTrust cmdlet:

Add-AdfsLocalClaimsProviderTrust -Name “Vendors” -Identifier “urn:vendors” -Type L References: https://technet.microsoft.com/en-us/library/dn823754(v=ws.11).aspx

Question No: 47 HOTSPOT

You have an Active Directory domain named Contoso.com. The domain contains Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The Hyper-V hosts are configured to use NVGRE for network virtualization.

You have six virtual machines that are connected to an external switch. The virtual machines are configured as shown.

Ensurepass 2018 PDF and VCE

To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

The GRE keys must match.

To separate the traffic between the two virtualized networks, the GRE headers on the tunneled packets include a GRE Key that provides a unique Virtual Subnet ID for each virtualized network.

References:

https://blogs.technet.microsoft.com/keithmayer/2012/10/08/step-by-step-hyper-v-network- virtualization-31-days-of-favorite-features-in-winserv-2012-part-8-of-31/

Question No: 48 HOTSPOT

You have a server named Server1 that runs Windows Server 2016 and has a Hyper-V server role installed.

You open Disk Management on Server1 as shown in the following graphic.

Ensurepass 2018 PDF and VCE

You plan to configure Disk 13 as a pass-through disk for a generation 1 virtual machine.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 49 DRAG DROP

You have a Hyper-V host named Server1 that runs Windows Server 2016.

The installation source files for Windows Server 2016 are located in D:\Source. You need to create a Nano Server image.

Which cmdlets should you run? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bat between panes or scroll to view content.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Step 1: Import Module

Import-Module .\NanoServerImageGenerator.psm1 Step 2: New New-NanoServerImage

Create Nano Server Image VHDX

New-NanoServerImage -MediaPath .\Files -BasePath.\Base -TargetPath

.\Images\NanoVMGA.vhdx

References: https://technet.microsoft.com/en-us/windows-server-docs/get-started/deploy- nano-server

Question No: 50

You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.

You need to ensure that the traffic is distributed evenly among the virtual machines that host App1.

What should you include in the environment?

  1. Network Controller and Windows Server Software Load Balancing (SLB) nodes

  2. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

  3. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes

  4. Network Controller and Windows Server Network Load Balancing (NLB) nodes

Answer: A Explanation:

References:

https://technet.microsoft.com/en-us/library/mt632286.aspx

100% Free Download!
Download Free Demo:70-743 Demo PDF
100% Pass Guaranteed!
Download 2018 EnsurePass 70-743 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 EnsurePass IT Certification PDF and VCE

[Free] 2018(Jan) EnsurePass Testinsides Microsoft 70-743 Dumps with VCE and PDF 51-60

EnsurePass
2018 Jan Microsoft Official New Released 70-743
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-743.html

Upgrading Your Skills to MCSA: Windows Server 2016

Question No: 51 HOTSPOT

You have a server named Server1 that runs Windows Server 2016. Server1 has the Web Application Proxy role service installed.

You are publishing an application named App1 that will use Integrated Windows authentication as shown in the following graphic.

Ensurepass 2018 PDF and VCE

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Publish an Integrated Windows authenticated-based Application for WebBrowser Clients Step 1: (configure the Backend server SPN – see first bulleted item below)

Before you begin, make sure that you have done the following:

Step 2: http//server2.contoso.com/publish/app1 Use the same URL as the backend server URL.

Web Application Proxy can translate host names in URLs, but cannot translate path names. Therefore, you can enter different host names, but you must enter the same path name. For example, you can enter an external URL of https://apps.contoso.com/app1/ and a backend server URL of http://app-server/app1/. However, you cannot enter an external URL of https://apps.contoso.com/app1/ and a backend server URL of

https://apps.contoso.com/internal-app1/.

References: https://technet.microsoft.com/en-us/library/dn383640(v=ws.11).aspx

Question No: 52

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1.

You need to provide VM1 with direct access to a graphics processing unit (GPU) on Server1.

What should you do first?

  1. OnVM1, install the Quality Windows Audio Video Experience (qWave) feature.

  2. Disable the display adapter device on Server1.

  3. In the settings of VM1, add a RemoteFX 3D Video Adapter.

  4. Dismount the display adapter on Server1.

Answer: B Explanation:

Before the physical device is allowed to be passed through to the VM, the device must be disabled on the host system. The physical device must be accessible/available exclusively to the VM only.

References: Introduction to Windows Server 2016 Hyper-V DiscreteDevice Assignment, page 5

https://lenovopress.com/lp0088.pdf

Question No: 53

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.

Solution: From a command prompt, you run netdom query fsmo. Does this meet the goal?

  1. Yes

  2. No

Answer: A Explanation:

References: https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out- who-has-your-fsmo-roles/

Question No: 54 HOTSPOT

You have a Hyper-V host that runs Windows Server 2016. The Hyper-V host has a virtual machine named VM1.

You have a VHD named VHD1.vhdx that has a generalized image of Windows Server 2016.

You plan to create multiple virtual machines that will use the generalized image. You need to create differencing disks based on VHD1.vhdx.

What command should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

References:

https://technet.microsoft.com/en-us/itpro/powershell/windows/hyper-v/new-vhd

Question No: 55

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.

Contoso.com has the following configuration:

Ensurepass 2018 PDF and VCE

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.

You need to configure Active Directory to support the planned deployment. Solution: You raise the forest functional level to Windows Server 2012 R2. Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

For a Windows Server 2012 R2 AD FS server, this solution would work. However, new installations of AD FS 2016 require the Active Directory 2016 schema (minimum version 85).

References: https://technet.microsoft.com/en-us/windows-server-docs/identity/ad- fs/operations/configure-device-based-conditional-access-on-premises

Question No: 56

You have an Active Directory domain named contoso.com.

The computers in contoso.com are installed by using Windows Deployment Services.

You have a server named Server1 that runs Windows Server 2016. Server1 is a member of contoso.com. Server1 has the Hyper-V role installed. Virtual machines on Server1 are connected to an external switch named Switch1.

You create a virtual machine named VM1 on Server1 by running the following cmdlets.

Ensurepass 2018 PDF and VCE

You need to ensure that you can install the operating system on VM1 by using Windows Deployment Services.

What should you do?

  1. Add a legacy network adapter to VM1.

  2. Modify the SwitchType parameter of Switch1.

  3. Modify the DefaultFlowMinimumBandwidthWeigth parameter of Switch1.

  4. Add a SCSI controller to VM1.

Answer: A Explanation:

A legacy network adapter is required for PXE boot.

Not B: The switch is an External switch which is what is required.

Question No: 57

Active Directory Recycle Bin is enabled. You discover that a support technician accidentally removed 100 users from an Active Directory group named Group1 an hour ago. You need to restore the membership of Group1.

What should you do?

  1. Perform tombstone reanimation.

  2. Export and import data by using Dsamain.

  3. Perform a non-authoritative restore.

  4. Recover the items by using Active Directory Recycle Bin.

Answer: B Explanation:

A group has been modified. Nothing has been deleted. Therefore, answers A and D will not work. Answer C would work if it was an authoritative restore, but not a non-authoritative restore.

The solution is to recover an earlier copy of the group from a backup or active directory snapshot by using DSadmain.

Question No: 58

You create a Nano server image named Nano1.vhdx by using the New-NanoServerImage cmdlet.

You attach Nano1.vhdx to a Generation 1 virtual machine named Nano1.

When you start Nano1, you get the following error message: “Boot failure. Reboot and select proper Boot device or Insert Boot Media in selected Boot device”

You need to successfully start Nano server.

What should you do?

  1. Attach Nano1.vhdx to a SCSIcontroller.

  2. Recreate Nano1 as a Generation 2 virtual machine.

  3. Increase the memory of Nano1 to 512 Mb.

  4. Modify the BIOS settings of Nano1.

Answer: B Explanation:

A Generation 1 VM cannot boot from a vhdx disk; only a Generation 2 VM can boot from an vhdx disk.

Question No: 59 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 and a member server named Server2.

Server1 has the DNS Server role installed. Server2 has IP Address Management (IPAM) installed. The IPAM server retrieves zones from Server1 as shown in the following table.

Ensurepass 2018 PDF and VCE

The IPAM server has one access policy configured as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Box 1: Yes

As a member of the IPAM DNS Administrator Role of the ADatum zone, User1 can add DNS records to it.

Box 2: Yes

As a member of the DNS Record Administrator Role of the Fabrikam zone, User1 can add DNS records to it.

Box 3: No

DNS Record Administrators cannot delete zones, only administer DNS records. References: https://technet.microsoft.com/en-us/library/hh831353(v=ws.11).aspx

Question No: 60

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. The servers have the same hardware configuration.

You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?

  1. Install the Failover Clustering feature and create a new cluster resource group.

  2. Run Set-DfsrServiceConfiguration and specify the -RPCPort parameter.

  3. Run New-SRPartnership and specify the -ReplicationMode parameter.

  4. Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).

Answer: A Explanation:

Deploy Stretch Cluster with Volume Replication by implementing the following steps:

References: https://www.starwindsoftware.com/blog/how-to-configure-storage-replication- using-windows-server-2016-part-2

100% Free Download!
Download Free Demo:70-743 Demo PDF
100% Pass Guaranteed!
Download 2018 EnsurePass 70-743 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 EnsurePass IT Certification PDF and VCE

[Free] 2018(Jan) EnsurePass Testinsides Microsoft 70-743 Dumps with VCE and PDF 61-70

EnsurePass
2018 Jan Microsoft Official New Released 70-743
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-743.html

Upgrading Your Skills to MCSA: Windows Server 2016

Question No: 61 HOTSPOT

Your network contains an Active Directory forest. The forest contains two sites named Site1 and Site2. Site1 contains 10 domain controllers. Site1 and Site2 connect to each other by using a WAN link.

You run the Active Directory Domain Services Configuration Wizard as shown in the following graphic.

Ensurepass 2018 PDF and VCE

Server3 is the only server in Site2.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Box1: stop and start the Active Directory Domain Services (AD DS)

Box 2: Can log on if they have previously logged on.

By selectively caching credentials, RODCs address some of the challenges that enterprises can encounter in branch offices and perimeter networks (also known as DMZs) that may lack the physical security that is commonly found in datacenters and hub sites.

Question No: 62 HOTSPOT

You have a four-node Hyper-V cluster named Cluster1.

A virtual machine named VM1 runs on Cluster1. VM1 has a network adapter that connects to a virtual switch named Network1.

You need to prevent a network disconnection on VM1 from causing VM1 to move to another cluster node.

What command should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 63

You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.

You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

  1. Run the sc control command.

  2. Run the New-NetFirewallRule cmdlet.

  3. Modify the routing table on Server1.

  4. Run the sc config command.

Answer: D Explanation:

References:

https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage- docker/configure-docker-daemon

Question No: 64

You have a server named Server1 that runs Windows Server 2016. You need to configure Server1 as a Web Application Proxy.

Which server role or role service should you install on Server1?

  1. Web Server (IIS)

  2. Network Policy and Access Services

  3. Direct Access and VPN (RAS)

  4. Active Directory Federation Services

  5. Remote Access

Answer: E

Question No: 65 DRAG DROP

Your network contains an Active Directory domain. The domain contains two domain controllers named DC1 and DC2. DC2 is a virtual machine that is hosted on a Hyper-V host named HyperV1. DC1 holds the PDC emulator operations master role.

You need to create a new domain controller named DC3 by using domain controller cloning.

Which five actions should you perform in sequence before you can import the cloned virtual machine? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 66 HOTSPOT

Your company has a main office and a branch office. The two offices connect to each other by using a WAN link.

Your network contains an Active Directory forest named contoso.com. The forest contains a domain controller named DC1. All of the domain controllers are located in the main office.

You install a read-only domain controller (RODC) named RODC1 in the branch office.

You create a user account for a new user named User1. You add User1 to the Allowed RODC Password Replication Group. User1 starts work on Monday.

You are notified that the WAN link will be down for maintenance on Monday. You need to ensure that User1 can log on in the branch office site on Monday.

Which command should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

References:

https://technet.microsoft.com/en-us/library/cc742095(v=ws.11).aspx

Question No: 67

You have an Active Directory domain that contains several Hyper-V hosts that run Windows Server 2016.

You plan to deploy network virtualization and to centrally manage Datacenter Firewall policies.

Which component must you install for the planned deployment?

  1. the Routing role service

  2. the Canary Network Diagnostics feature

  3. the Network Controller server role

  4. the Data Center Bridging feature

Answer: C Explanation:

Using Windows PowerShell, the REST API, or a management application, you can use

Network Controller to manage the following physical and virtual network infrastructure: References: https://technet.microsoft.com/en-us/library/dn859239.aspx

Question No: 68

You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.

You need to ensure that members of a security group named Docker Administrators can administer Docker.

What should you do?

  1. Run theSet-Service cmdlet.

  2. Modify the Security settings of Dockerd.exe.

  3. Edit the Daemon.json file.

  4. Modify the Security settings of Docker.exe.

Answer: C Explanation:

References:

https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage- docker/configure-docker-daemon

Question No: 69

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.

Solution: You open Active Directory Domains and Trusts, right-click Active Directory Domains and Trust in the console tree, and then click Operations Master.

Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

This solution only shows the Domain Naming Master.

Question No: 70 DRAG DROP

You have a network that contains several servers that run Windows Server 2016.

You need to use Desired State Configuration (DSC) to configure the servers to meet the following requirements:

How should you configure the DSC recourses? To answer, drag the appropriate values to the correct locations. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Box 1: WindowsFeature

The WindowsFeature resource in Windows PowerShell Desired State Configuration (DSC) provides a mechanism to ensure that roles and features are added or removed on atarget node.

Box 2: Present

The Ensure Property indicates if the role or feature is added. To ensure that the role or feature is added, set this property to quot;Presentquot; To ensure that the role or feature is removed, set the property to quot;Absentquot;.

Example:

WindowsFeature RoleExample

{

Ensure = quot;Presentquot;

# Alternatively, to ensure the role is uninstalled, set Ensure to quot;Absentquot; Name = quot;Web-Serverquot;# Use the Name property from Get-WindowsFeature

}

Box 3: Service

The Service resource in Windows PowerShell Desired State Configuration (DSC) provides a mechanism to manage services on the target node.

Box 4: Running

The State property indicates the state, either Running or Stopped, you want to ensure for the service.

References:

https://msdn.microsoft.com/en-us/powershell/dsc/windowsfeatureresource https://msdn.microsoft.com/en-us/powershell/dsc/serviceresource

100% Free Download!
Download Free Demo:70-743 Demo PDF
100% Pass Guaranteed!
Download 2018 EnsurePass 70-743 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 EnsurePass IT Certification PDF and VCE