[Free] 2017(Oct) EnsurePass Dumpsleader Microsoft 70-741 Dumps with VCE and PDF 21-30

EnsurePass
2017 Oct Microsoft Official New Released 70-741
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-741.html

Networking with Windows Server 2016

Question No: 21

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.

The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.

The domain contains three servers configured as shown in the following table.

Ensurepass 2017 PDF and VCE

Client computers obtain TCP/IP settings from Server3.

You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.

Server1 has four DNS zones configured as shown in the following table.

Ensurepass 2017 PDF and VCE

You need to ensure that when a computer is removed from the network, the associated records are deleted automatically after 15 days.

Which two actions should you perform? Each correct answer presents part of the solution.

  1. Create a scheduled task that runs the Remove-Computer cmdlet.

  2. Modify the Zone Aging/Scavenging Properties of the zone.

  3. Modify the Time to live (TTL) value of the start of authority (SOA) record.

  4. Set the Scavenging period of Server1.

  5. Modify the Expires after value of the start of authority (SOA) record.

Answer: B,D Explanation:

https://technet.microsoft.com/en-us/library/cc771362(v=ws.10).aspx

Question No: 22

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static IP address.

You need to prevent all client computers that have physical address beginning with 98-5F from leasing an IP address from Server1.

What should you do?

  1. From the properties of Scope1, modify the Conflict detection attempts setting.

  2. From the properties of Scope1, configure Name Protection.

  3. From the properties of IPv4, configure the bindings.

  4. From IPv4, create a new filter.

  5. From the properties of Scope1, create an exclusion range.

  6. From IPv4, run the DHCP Policy Configuration Wizard.

  7. From Control Panel, modify the properties of Ethernet.

  8. From Scope1, create a reservation.

Answer: E Explanation:

https://technet.microsoft.com/en-us/library/ee941125(v=ws.10).aspx

Question No: 23 DRAG DROP

You have an internal network that contains multiple subnets.

You have a Microsoft Azure subscription that contains multiple virtual networks.

You need to deploy a hybrid routing solution between the network and the Azure subscription. The solution must ensure that the computers on all of the networks can

connect to each other.

You install RAS Gateway and enable BGP routing on the network and in Azure.

Which three actions should you perform next in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Explanation:

Ensurepass 2017 PDF and VCE

https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-bgp-resource-manager- ps#enablebgp

Question No: 24

You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 are connected to the same network.

On Server1 and Server2, you create an external network switch named Switch1. You have the virtual machine shown in the following table.

Ensurepass 2017 PDF and VCE

All three virtual machines are connected to Switch1.

You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.

What should you do?

  1. Configure network virtualization for VM1 and VM2.

  2. Modify the subnet mask of VM1 and VM2.

  3. On Server2, configure the VLAN ID setting of Switch1.

  4. On Server2, create an external switch and connect VM3 to the switch.

Answer: A Explanation:

https://blogs.technet.microsoft.com/networking/2016/10/26/network-virtualization-with- ws2016-sdn/

Question No: 25

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a DHCP server named Server1 that has an IPv4 scope named Scope1.

Users report that when they turn on their client computers, it takes a long time to access the network.

You validate that it takes a long time for the computers to receive an IP address from Server1.

You monitor the network traffic and discover that Server1 issues five ping commands on the network before leasing an IP address.

You need to reduce the amount of time it takes for the computers to receive an IP address. What should you do?

  1. From the properties of Scope1, modify the Conflict detection attempts setting.

  2. From the properties of Scope1, configure Name Protection.

  3. From the properties of IPv4, configure the bindings.

  4. From IPv4, create a new filter.

  5. From the properties of Scope1, create an exclusion range.

  6. From IPv4, run the DHCP Policy Configuration Wizard.

  7. From Control Panel, modify the properties of Ethernet.

  8. From Scope1, create a reservation.

Answer: A Explanation:

https://technet.microsoft.com/en-us/library/ee941125(v=ws.10).aspx

Question No: 26

You have a server named Server1 that runs Windows Server 2016 and is configured as a domain controller.

You install the DNS Server server role on Server1.

You plan to store a DNS zone in a custom Active Directory partition. You need to create a new Active Directory partition for the zone.

What should you use?

  1. Set-DnsServer

  2. Active Directory Sites and Services

  3. Dns.exe

  4. Dnscmd.exe

Answer: D Explanation:

https://technet.microsoft.com/en-us/library/ee649181(v=ws.10).aspx

Question No: 27

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.

The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.

The domain contains three servers configured as shown in the following table.

Ensurepass 2017 PDF and VCE

Client computers obtain TCP/IP settings from Server3.

You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.

Server1 has four DNS zones configured as shown in the following table.

Ensurepass 2017 PDF and VCE

You need to ensure that when a record is added dynamically to fabrikam.com, only the computer that created the record can modify the record. The solution must allow administrators to modify all of the records in fabrikam.com.

What should you do?

  1. Change fabrikam.com to an Active Directory-integrated zone.

  2. Raise the functional level of the domain.

  3. Modify the security settings of the Fabrikam.com.dns file.

  4. Modify the Start of Authority (SOA) settings of fabrikam.com

Answer: A Explanation:

https://technet.microsoft.com/en-us/library/cc753751(v=ws.11).aspx

Question No: 28

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the

DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.

All client computers dynamically register their names in the contoso.com DNS zone on Server1.

You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.

You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.

Solution: You set the Time to live (TTL) value of all of the records in the zone. Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

https://technet.microsoft.com/en-us/library/cc958972.aspx

Question No: 29

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.

Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.

You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2017 PDF and VCE

You need to ensure that all of the Windows 10 computers can receive a DHCP lease. Solution: You activate the scope.

Does this meet the goal?

  1. Yes

  2. No

Answer: A Explanation:

https://technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx

Question No: 30

You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.

You need to ensure that the traffic is distributed evenly among the virtual machines that host App1.

What should you include in the environment?

  1. Network Controller and Windows Server Network Load Balancing (NLB) nodes

  2. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

  3. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes

  4. Network Controller and Windows Server Software Load Balancing (SLB) nodes

Answer: B Explanation:

https://technet.microsoft.com/en-us/library/mt403307(v=ws.11).aspx#bkmk_slb

100% Free Download!
Download Free Demo:70-741 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 70-741 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

[Free] 2017(Oct) EnsurePass Dumpsleader Microsoft 70-741 Dumps with VCE and PDF 11-20

EnsurePass
2017 Oct Microsoft Official New Released 70-741
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-741.html

Networking with Windows Server 2016

Question No: 11

You have servers named Server1 and DHCP1. Both servers run Windows Server 2016. DHCP1 contains an IPv4 scope named Scope1.

You have 1,000 client computers.

You need to configure Server1 to lease IP addresses for Scope1. The solution must ensure that Server1 is used to respond to up to 30 percent of the DHCP client requests only.

You install the DHCP Server server role on Server1. What should you do next?

  1. From the DHCP console, run the Configure Failover wizard.

  2. From Server Manager, install the Network Load Balancing feature.

  3. From Server Manager, install the Failover Clustering feature.

  4. From the DHCP console, create a superscope.

Answer: A Explanation:

https://technet.microsoft.com/en-us/library/hh831385(v=ws.11).aspx

Question No: 12

Your company has two main offices. The offices are located in London and Seattle. All servers run Windows Server 2016.

In the Seattle office, you have a Distributed File System (DFS) server named FS1. FS1 has a folder named Folder1 that contains large Windows image files.

In the London office, you deploy a DFS server named FS2, and you then replicate Folder1 to FS2.

After several days, you discover that the replication of certain files failed to complete. You need to ensure that all of the files in Folder1 can replicate to FS2.

What should you do?

  1. Modify the disk quota of the drive that contains Folder1.

  2. From a command prompt, run dfsutil /purgemupcache.

  3. Create a quota for Folder1 by using File Server Resource Manager (FSRM).

  4. Modify the size of staging area of Folder1.

Answer: C Explanation:

https://technet.microsoft.com/en-us/library/hh831487(v=ws.11).aspx

Question No: 13

Your network contains multiple wireless access points (WAPs) that use WPA2-Personal authentication. The network contains an enterprise root certification authority (CA).

The security administrator at your company plans to implement WPA2-Enterprise authentication on the WAPs.

To support the authentication change, you deploy a server that has Network Policy Server (NPS) installed.

You need to configure NPS to authenticate the wireless clients.

What should you do on the NPS server?

  1. Add RADIUS clients and configure network policies.

  2. Create a remote RADIUS server group and configure connection request policies.

  3. Create a remote RADIUS server group and install a server certificate.

  4. Add RADIUS clients and configure connection request policies.

Answer: A Explanation:

https://ittrainingday.com/2013/12/25/how-to-configure-a-windows-radius-server-for-802-1x- wireless-or-wired-connections/

Question No: 14

You have a server named Server1 that runs Windows Server 2016. Server1 is located on the perimeter network, and only inbound TCP port 443 is allowed to connect Server1 from the Internet.

You install the Remote Access server role on Server1.

You need to configure Server1 to accept VPN connections over port 443. Which VPN protocol should you use?

  1. PPTP

  2. SSTP

  3. L2TP

  4. IKEv2

Answer: B Explanation:

https://technet.microsoft.com/en-us/library/dd458955(v=ws.10).aspx

Question No: 15

Your company has 5,000 users who work remotely.

You have 40 VPN servers that host the remote connections for the users. You plan to deploy a RADIUS solution that contains five RADIUS servers.

You need to ensure that client authentication requests are distributed evenly between the five RADIUS servers.

What should you do?

  1. Install the Network Load Balancing role service on all of the RADIUS server. Configure all of the RADIUS clients to connect to a virtual IP address.

  2. Deploy RAS Gateway to a new server. Configure all of the RADIUS clients to connect to RAS Gateway.

  3. Install the Failover Clustering role service on all of the RADIUS servers. Configure all of the RADIUS clients to connect to the IP address of the cluster.

  4. Deploy a RADIUS proxy to a new server. Configure all of the RADIUS clients to connect to the RADIUS proxy.

Answer: D Explanation:

https://technet.microsoft.com/en-us/library/dd197433(v=ws.10).aspx

Question No: 16

You have a server that is configured as a hosted BranchCache server.

You discover that a Service Connection Point (SCP) is missing for the BranchCache server.

What should you run to register the SCP?

  1. setspn.exe

  2. Reset-BC

  3. ntdsutil.exe

  4. Enable-BCHostedServer

Answer: D Explanation:

https://technet.microsoft.com/en-us/library/jj862376(v=ws.11).aspx

Question No: 17 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains a domain-based Distributed File System (DFS) namespace named Namespace1. Namespace1 has the following configuration.

Ensurepass 2017 PDF and VCE

Namespace1 has a folder named Folder1.

Folder1 has the targets shown in the following table.

Ensurepass 2017 PDF and VCE

You have the site links shown in the following table.

Ensurepass 2017 PDF and VCE

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Explanation:

Ensurepass 2017 PDF and VCE

How to set up DFS Namespaces in Windows Server 2016

Question No: 18 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.

Server1 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed. Server2 has IP Address Management (IPAM) installed.

You create a domain user named User1.

You need to integrate IPAM and VMM. VMM must use the account of User1 to manage IPAM. The solution must use the principle of least privilege.

What should you do on each server? To answer, select the appropriate options in the answer area.

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Explanation:

Ensurepass 2017 PDF and VCE

On Server1: Create a Run As Account that uses User1. On Server2: Add User1 to IPAM ASM Administrator Role.

https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx https://technet.microsoft.com/en-us/library/jj878348(v=ws.11).aspx

Question No: 19

You company has a main office in London. The company has 1,000 users who are located in many countries.

You plan to deploy a large remote access solution for the company.

The London office has three servers named Server1, Server2, and Server3 that run Windows Server 2016.

You plan to use Server1 as a VPN server, Server2 as a RADIUS proxy, and Server3 as a RADIUS server.

You need to configure Server2 to support the planned deployment.

Which three actions should you perform on Server2? Each correct answer presents part of the solution.

  1. Create a connection request policy.

  2. Deploy a Windows container.

  3. Add a RADIUS client.

  4. Create a network policy.

  5. Create a remote RADIUS server group.

Answer: A,C,E Explanation:

How to configure RADIUS proxy servers

Question No: 20 DRAG DROP

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016.

You install IP Address Management (IPAM) on Server1.

You need to manually start discovery of the servers that IPAM can manage in contoso.com.

Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Explanation:

Ensurepass 2017 PDF and VCE

https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamdiscoverydomain https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamserverinventory https://technet.microsoft.com/itpro/powershell/windows/ipam/invoke-ipamserverprovisioning

100% Free Download!
Download Free Demo:70-741 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 70-741 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

[Free] 2017(Oct) EnsurePass Dumpsleader Microsoft 70-741 Dumps with VCE and PDF 1-10

EnsurePass
2017 Oct Microsoft Official New Released 70-741
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-741.html

Networking with Windows Server 2016

Question No: 1

You have a server named Host1 that runs Windows Server 2016.

You configure Host1 as a virtualization host and create 20 new virtual machines on Host1.

You need to ensure that all of the virtual machines can connect to the Internet through Host1.

Which three actions should you perform? Each correct answer presents part of the solution.

  1. On a virtual machine, install the Remote Access server role.

  2. From the properties of each virtual machine, enable virtual LAN identification.

  3. From the properties of each virtual machine, connect to the virtual machine switch.

  4. On Host1, configure the network address translation (NAT) network.

  5. On Host1, create an internal virtual machine switch and specify an IP address for the switch.

Answer: C,D,E Explanation:

https://technet.microsoft.com/en-us/library/ee449441(v=ws.10).aspx

Question No: 2

Your company has a main office in London and a branch office in Seattle. The offices connect to each other by using a WAN link.

In the London office, you have a Distributed File System (DFS) server named FS1 that contains a folder named Folder1.

In the Seattle office, you have a DFS server named FS2.

All servers run Windows Server 2016.

You configure replication of Folder1 to FS2.

Users in both offices frequently add files in Folder1.

You monitor DFS Replication, and you discover excessive replication over the WAN link during business hours.

You need to reduce the amount of bandwidth used for replication during business hours. The solution must ensure that the users can continue to save content to Folder1.

What should you do?

  1. Modify the quota settings on Folder1 on FS2.

  2. Modify the properties of the replication group.

  3. Configure the copy of Folder1 on FS2 as read-only.

  4. Modify the replicated folder properties of Folder1 on FS1.

Answer: B

Question No: 3

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.

All client computers dynamically register their names in the contoso.com DNS zone on Server1.

You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.

You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.

Solution: You run the dnscmd.exe command and specify the /AgeAllRecords parameter for the zone.

Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

https://technet.microsoft.com/en-us/library/cc772069(v=ws.11).aspx

Question No: 4

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.

Users report that their client computers fail to obtain an IP address.

You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

Ensurepass 2017 PDF and VCE

Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.

You need to ensure that all of the client computers on the network can obtain an IP address from Server2.

Solution: You run the Set-DhcpServerv4Scope cmdlet. Does this meet the goal?

  1. Yes

  2. No

Answer: A Explanation:

https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope

Question No: 5

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.

Users report that their client computers fail to obtain an IP address.

You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

Ensurepass 2017 PDF and VCE

Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.

You need to ensure that all of the client computers on the network can obtain an IP address from Server2.

Solution: You run the Repair-DhcpServerv4IPRecord cmdlet. Does this meet the goal?

  1. Yes

  2. No

Answer: B

Explanation:

https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope

Question No: 6 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2 and Server3 have the DHCP Server role installed and have several DHCP scopes configured. The IPAM server retrieves data from Server2 and Server3.

A domain user named User1 is a member of the groups shown in the following table.

Ensurepass 2017 PDF and VCE

On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope Administrator Role with the \Global access scope to the user.

Which actions can User1 perform? To answer, select the appropriate options in the answer area.

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Explanation:

Ensurepass 2017 PDF and VCE

https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx

Question No: 7

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.

Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.

You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2017 PDF and VCE

You need to ensure that all of the Windows 10 computers can receive a DHCP lease. Solution: You start the DHCP Server service.

Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

https://technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx

Question No: 8 HOTSPOT

You have a network address translation (NAT) server named NAT1 that has an external IP address of 131.107.50.1 and an internal IP address of 10.0.0.1.

You deploy a new server named Web1 that has an IP address of 10.0.0.211.

A remote server named app.fabrikam.com has an IP address of 131.107.1.232. You need to make Web1 accessible to app.fabrikam.com through NAT1.

What command should you run from NAT1? To answer, select the appropriate options in the answer area.

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Explanation:

Ensurepass 2017 PDF and VCE

https://technet.microsoft.com/en-us/itpro/powershell/windows/nat/add-netnatstaticmapping

Question No: 9

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static IP address. Each network card connects to a different network segment.

Server1 has an IPv4 scope named Scope1.

You need to ensure that Server1 only uses one network card when leasing IP addresses in Scope1.

What should you do?

  1. From the properties of Scope1, modify the Conflict detection attempts setting.

  2. From the properties of Scope1, configure Name Protection.

  3. From the properties of IPv4, configure the bindings.

  4. From IPv4, create a new filter.

  5. From the properties of Scope1, create an exclusion range.

  6. From IPv4, run the DHCP Policy Configuration Wizard.

  7. From Control Panel, modify the properties of Ethernet.

  8. From Scope1, create a reservation.

Answer: C Explanation:

https://technet.microsoft.com/en-us/library/cc770650(v=ws.11).aspx

Question No: 10 HOTSPOT

You network contains an Active Directory named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.

The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.

Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)

Ensurepass 2017 PDF and VCE

The DHCP scopes are configured as shown in the Scopes Exhibit. (Click the Exhibit button.)

Ensurepass 2017 PDF and VCE

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Ensurepass 2017 PDF and VCE

Answer:

Ensurepass 2017 PDF and VCE

Explanation:

Ensurepass 2017 PDF and VCE

https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx

100% Free Download!
Download Free Demo:70-741 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 70-741 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE