[Free] 2017(Aug) EnsurePass Examcollection Microsoft 70-741 Dumps with VCE and PDF 1-10

EnsurePass
2017 Aug Microsoft Official New Released 70-741
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-741.html

Networking with Windows Server 2016

Question No: 1

You have a server named Host1 that runs Windows Server 2016.

You configure Host1 as a virtualization host and create 20 new virtual machines on Host1.

You need to ensure that all of the virtual machines can connect to the Internet through Host1.

Which three actions should you perform? Each correct answer presents part of the solution.

  1. On a virtual machine, install the Remote Access server role.

  2. From the properties of each virtual machine, enable virtual LAN identification.

  3. From the properties of each virtual machine, connect to the virtual machine switch.

  4. On Host1, configure the network address translation (NAT) network.

  5. On Host1, create an internal virtual machine switch and specify an IP address for the switch.

Answer: C,D,E Explanation:

https://technet.microsoft.com/en-us/library/ee449441(v=ws.10).aspx

Question No: 2

Your company has a main office in London and a branch office in Seattle. The offices connect to each other by using a WAN link.

In the London office, you have a Distributed File System (DFS) server named FS1 that contains a folder named Folder1.

In the Seattle office, you have a DFS server named FS2.

All servers run Windows Server 2016.

You configure replication of Folder1 to FS2.

Users in both offices frequently add files in Folder1.

You monitor DFS Replication, and you discover excessive replication over the WAN link during business hours.

You need to reduce the amount of bandwidth used for replication during business hours. The solution must ensure that the users can continue to save content to Folder1.

What should you do?

  1. Modify the quota settings on Folder1 on FS2.

  2. Modify the properties of the replication group.

  3. Configure the copy of Folder1 on FS2 as read-only.

  4. Modify the replicated folder properties of Folder1 on FS1.

Answer: B

Question No: 3

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.

All client computers dynamically register their names in the contoso.com DNS zone on Server1.

You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.

You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.

Solution: You run the dnscmd.exe command and specify the /AgeAllRecords parameter for the zone.

Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

https://technet.microsoft.com/en-us/library/cc772069(v=ws.11).aspx

Question No: 4

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.

Users report that their client computers fail to obtain an IP address.

You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

image

Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.

You need to ensure that all of the client computers on the network can obtain an IP address from Server2.

Solution: You run the Set-DhcpServerv4Scope cmdlet. Does this meet the goal?

  1. Yes

  2. No

Answer: A Explanation:

https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope

Question No: 5

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.

Users report that their client computers fail to obtain an IP address.

You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

image

Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.

You need to ensure that all of the client computers on the network can obtain an IP address from Server2.

Solution: You run the Repair-DhcpServerv4IPRecord cmdlet. Does this meet the goal?

  1. Yes

  2. No

Answer: B

Explanation:

https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope

Question No: 6 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2 and Server3 have the DHCP Server role installed and have several DHCP scopes configured. The IPAM server retrieves data from Server2 and Server3.

A domain user named User1 is a member of the groups shown in the following table.

image

On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope Administrator Role with the \Global access scope to the user.

Which actions can User1 perform? To answer, select the appropriate options in the answer area.

image

Answer:

image

Explanation:

image

https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx

Question No: 7

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.

Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.

You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

image

You need to ensure that all of the Windows 10 computers can receive a DHCP lease. Solution: You start the DHCP Server service.

Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

https://technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx

Question No: 8 HOTSPOT

You have a network address translation (NAT) server named NAT1 that has an external IP address of 131.107.50.1 and an internal IP address of 10.0.0.1.

You deploy a new server named Web1 that has an IP address of 10.0.0.211.

A remote server named app.fabrikam.com has an IP address of 131.107.1.232. You need to make Web1 accessible to app.fabrikam.com through NAT1.

What command should you run from NAT1? To answer, select the appropriate options in the answer area.

image

Answer:

image

Explanation:

image

https://technet.microsoft.com/en-us/itpro/powershell/windows/nat/add-netnatstaticmapping

Question No: 9

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static IP address. Each network card connects to a different network segment.

Server1 has an IPv4 scope named Scope1.

You need to ensure that Server1 only uses one network card when leasing IP addresses in Scope1.

What should you do?

  1. From the properties of Scope1, modify the Conflict detection attempts setting.

  2. From the properties of Scope1, configure Name Protection.

  3. From the properties of IPv4, configure the bindings.

  4. From IPv4, create a new filter.

  5. From the properties of Scope1, create an exclusion range.

  6. From IPv4, run the DHCP Policy Configuration Wizard.

  7. From Control Panel, modify the properties of Ethernet.

  8. From Scope1, create a reservation.

Answer: C Explanation:

https://technet.microsoft.com/en-us/library/cc770650(v=ws.11).aspx

Question No: 10 HOTSPOT

You network contains an Active Directory named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.

The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.

Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)

image

The DHCP scopes are configured as shown in the Scopes Exhibit. (Click the Exhibit button.)

image

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

image

Answer:

image

Explanation:

image

https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx

100% Free Download!
Download Free Demo:70-741 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 70-741 Full Exam PDF and VCE
Get 10% off your purchase! Copy it:TJDN-947R-9CCD [2017.07.01-2017.07.31]

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

Leave a Reply

Your email address will not be published. Required fields are marked *